Document feeder whole unit kit and scanner whole unit kit
Use the following procedure to separate the document feeder assembly from the scanner assembly
when either whole unit kit is being replaced.
1.
Before proceeding, remove the following:
Document feeder/scanner assembly. See
●
2.
Carefully place the document feeder/scanner assembly upside down on a flat surface.
3.
Remove three screws and remove the scanner rear cover.
Figure 1-69
52
Chapter 1 Removal and replacement
Remove the Document feeder whole unit kit and scanner whole unit kit (1 of 6)
Document feeder/scanner assembly on page 46
ENWW