Table of Contents
Advertisement
3.
Put the product on its side so that the gear cover faces up. Remove three screws (callout 1) and the
gear cover.
Reinstallation tip
reinstallation.
Figure 1-177
3
4.
For the Tray 2 pickup solenoid: Remove one screw (callout 1), and then remove the solenoid
(callout 2).
For the Tray 1 pickup solenoid: Remove one screw (callout 3), and then remove the solenoid
(callout 4).
Figure 1-178
4
1
TIP:
Thread the FFC (callout 6) through the gear cover when reinstalling, and make sure to
reinstall the gear (callout 5) if it becomes dislodged.
ENWW
Note the location of the FFC (callout 2) and the shaft (callout 3) for
Remove the Tray 1 or Tray 2 pickup solenoid (2 of 3)
2
1
Remove the Tray 1 or Tray 2 pickup solenoid (3 of 3)
3
2
6
5
Removal and replacement procedures
119
- Quick Links:
- Document Feeder Assemblies and Scanner
Hide quick links:
Advertisement
Table of Contents
