Table of Contents
Advertisement
redundancy, scan the GS1 DataBar Omnidirectional Redundancy bar code below, then scan a redundancy count
between 0 and 10 on the
= 0.
GS1 DataBar Limited
GS1 DataBar Limited On/Off
* On
GS1 DataBar Limited Redundancy
If you are encountering errors when reading GS1 DataBar Limited bar codes, you may want to adjust the redundancy
count. Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the number
of errors. Note that the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redun-
dancy, scan the GS1 DataBar Limited Redundancy bar code below, then scan a redundancy count between 0 and 10 on
the
Programming Chart
Programming Chart
inside the back cover of this manual. Then scan the
GS1 DataBar Omnidirectional
< Default All GS1 DataBar Limited Settings >
inside the back cover of this manual. Then scan the
GS1 DataBar Limited
Redundancy
Save
Redundancy
Save
bar code. Default
Off
bar code. Default = 0.
8 - 47
- Quick Links:
- Connecting the Device
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
