Table of Contents
Advertisement
Where appropriate, you must adjust the entry for the drive in BIOS Setup or in the
i
configuration of the RAID controller.
Removing a non-accessible 3½ inch drive
Requirements:
●
You have made certain that the drive to be removed has not been combined in a RAID array. If
the drive is part of a RAID array, you must first of all delete the array.
Further information on configuration of the optional RAID controller can be found in the
i
appropriate documentation on the "Drivers & Utilities" DVD or on the Internet at
http://ts.fujitsu.com/support.
CAUTION!
!
All the data on all the drives in the array will be lost. Perform a backup before you delete a
RAID array.
►
To release the locking mechanism of the drive, press the clip in the direction of the arrow (1).
►
Swing the grip of the drive fully in the direction of the arrow (2).
The drive is released.
►
Pull out the drive.
Fujitsu Technology Solutions
System expansion
71
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
