Target Zone
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
When "Trigger Mode" is set to "Power," electronic signal transmission
is synchronized with the power status of the main zone.
Main
When "Trigger Mode" is set to "Source," electronic signal transmission
is synchronized with the input switching in the main zone.
When "Trigger Mode" is set to "Power," electronic signal transmission
is synchronized with the power status of Zone2.
Zone2
When "Trigger Mode" is set to "Source," electronic signal transmission
is synchronized with the input switching in Zone2.
When "Trigger Mode" is set to "Power," electronic signal transmission
is synchronized with the power status of the main zone or Zone2.
All
When "Trigger Mode" is set to "Source," electronic signal transmission
is synchronized with the input switching in the main zone or Zone2.
■
Memory Guard
Prevents accidental changes to the settings.
Settings
Off
Does not protect the settings.
On
Protects the settings until "Off" is selected.
• When "Memory Guard" is set to "On", the lock icon (o) is displayed on the menu screen.
Icon
ECO
Configures the power supply settings.
■
Auto Power Standby
Sets the amount of time for the auto-standby function. If you do not operate the unit or if
no input signals are detected for the specified time, the unit will automatically go into
standby mode.
Settings
Off
Does not set the unit to standby mode automatically.
Sets the unit to standby mode when you have not operated the unit
20 Minutes
and no input signals are detected for 20 minutes.
Sets the unit to standby mode when you have not operated the unit for
2 Hours, 4 Hours,
the specified time. For example, when "2 Hours" is selected, the unit
8 Hours, 12 Hours
will switch to standby mode if you do not operate it for 2 hours.
Default
U.K. and Europe models: 20 Minutes
Other models: Off
• Just before the unit enters standby mode, "AutoPowerStdby" appears and then countdown starts in the
front display.
116
En