Motorola AP-7131 Installation Manual page 32
Hide thumbs
Also See for AP-7131:
- Product reference manual (706 pages) ,
- Installation manual (58 pages) ,
- Brochure (12 pages)
Table of Contents
Advertisement
28
AP-7131 Access Point: Installation Guide
Band of Operation
model. If using a dual-radio AP-7131, the user can enable both RF bands.
9. Select the
its ESSID security scheme for basic operation.
NOTE
a. Enter the Extended Services Set Identification (ESSID) and name associated with the
WLAN.
b. Use the
the 802.11a/n or 802.11b/g/n radio. Ensure the radio selected has been enabled
(see step 8).
10. Once the WLAN's radio designations have been made, the radio must be configured in
respect to intended 2.4 or 5 GHz radio traffic and the antennas used. Refer to
Configuration
configure the Radio Settings field (at a minimum). If you know the radio's Properties,
Performance and Beacon Settings, those fields can also be defined at this time.
Define the Channel Settings, Power Level and 802.11 mode in respect to the 2.4 or 5 GHz
802.11b/g/n or 802.11a/n radio traffic and anticipated gain of the antennas.
CAUTION Only a qualified wireless network administrator should set the access
NOTE
field. Only one RF band option at a time is permissible in a single-radio
WLAN #1
tab (WLANs 1 - 4 are available within the Quick Setup screen) to define
A maximum of 16 WLANs are configurable within the AP-7131 Wireless
Configuration screen. The limitation of 16 WLANs exists regardless of the
number of radios supported.
Available On
checkboxes to define whether the target WLAN is operating over
->
Wireless
->
point radio configuration. Refer to the AP-7131 Product Reference
Guide for an understanding of the configurable values involved and
their implications. To access the guide, go to
http://support.symbol.com/support/product/manuals.do.
Even an AP-7131 configured with minimal values must protect its data
against theft and corruption. A security policy should be configured for
WLAN1 as part of the basic configuration outlined in this guide. A security
policy can be configured for the WLAN from within the Quick Setup
screen. Policies can be defined over time and saved to be used as needed
as the AP-7131's security requirements change. Motorola recommends
you familiarize yourself with the security options available on the AP-7131
before defining a security policy.
Radio Configuration
->
Radio1 (or
Radio2), and
Network
Hide quick links:
Advertisement
Table of Contents
