Screen Display - Epson RUNSENSE SF-810 User Manual
Gps sports monitor
Hide thumbs
Also See for RUNSENSE SF-810:
- User manual (132 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Note:
The screen shown may differ depending on the settings
you've selected.
See "Screen Layout options" on page 79.
4
Press C to stop measuring at any time; you can
press C again to resume measuring.
5
Hold down D while measuring is stopped to
reset the Measurement screen.
Screen display
Measurement screen
There are different measurement screens available. Each screen shows different information about your current
activity. Press A to switch between these screens.
Note:
You can change the number of lines displayed and the measurements displayed for each screen.
See "Screen settings" on page 77.
Screen
Screen 1
Measuring your workouts
The data measured up to that point is stored in
the product's memory. You can check your past
workouts by pressing D on the Time screen.
Note:
To stop measuring and return to the Time screen, do one
of the following:
O After resetting the measurement results in step 5,
hold down A.
O While the screen in step 4 is displayed while
measurement is stopped, hold down C. The
measurement results are reset and the Time screen
is displayed.
O If no operations are made for 60 minutes on a
screen other than the measuring screen, the Time
screen is displayed.
Default display
3 lines
32
See "Viewing past workouts" on page 49.
Default measurements shown
HR
Lap Pace
Distance
Advertisement
Table of Contents
