Related Manuals for Acer P1101C Series
Summary of Contents for Acer P1101C Series
- Page 1 Acer Projector P1101/P1101C/P1201/P1201B/ P1201i/P1201n/P1203P/P1203PB/ P1203Pi/P1206P/P1303PW Series User's Guide Downloaded from ProjectorsManual.com Manuals...
- Page 2 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
- Page 3 Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
- Page 4 • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.
- Page 5 Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: •...
- Page 6 Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed. Downloaded from ProjectorsManual.com Manuals...
- Page 7 For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Dispose Properly.”...
-
Page 8: Precautions
viii First things first Usage Notes • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. -
Page 9: Table Of Contents
Adjusting the Height of Projected Image How to optimize image size and distance How to get a preferred image size by adjusting distance and zoom User Controls Installation menu Acer Empowering Technology Onscreen Display (OSD) Menus Color Image Management Downloaded from ProjectorsManual.com Manuals... - Page 10 Setting Audio Timer Language Acer LAN webpage management How to login in Home Control Panel Network Setting Alert Setting Logout Appendices Troubleshooting LED & Alarm Definition Listing Replacing and cleaning the dust filters Replacing the Lamp Ceiling Mount Installation Specifications...
-
Page 11: Introduction
P1303PW: Native 1280 x 800 WXGA resolution 4:3 / 16:9 aspect ratio supported (P1101/P1101C/P1201/P1201B/P1203PB/ P1203Pi/P1201n/P1201i/P1203P/P1206P) Full/4:3/16:9/L.Box aspect ratio supported (P1303PW) • Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images • High brightness and contrast ratio • Versatile display modes (Bright, Presentation, Standard, Video, Education, User) enable optimum performance in any situation •... -
Page 12: Package Overview
Power cord VGA cable Security card 2 x Batteries Carrying case (#A) (#B) Acer Projector 3J 8 S Quick Start Guide 3J ' Q 2 x Quick Start Guide 2 x User's Guide (Wireless CD Remote control (Wireless Quick Start Guide... -
Page 13: Projector Overview
Projector Overview Projector Outlook Front / upper side Description Description Control panel Zoom lever Ventilation (inlet) Remote control receiver Ventilation (outlet) Focus ring Elevator button Zoom lens Elevator foot 10 Lens cap Rear side (P1101/P1201/P1203P/P1206P/P1303PW Series) P1101/P1201/ P1203P/P1206P/ P1303PW P1203P/P1206P/ P1303PW P1101/P1201 Downloaded from ProjectorsManual.com Manuals... - Page 14 Description Description Power socket Audio input connector USB connector RS232 connector HDMI connector 10 Kensington lock port Monitor loop-through output connector Below items are for P1203P/P1206P/ (VGA-Out) P1303PW only: PC analog signal/HDTV/component video 12V DC output connector input connector (VGA IN/VGA IN 1) Composite video input connector PC analog signal/HDTV/component video input connector (VGA IN 2)
- Page 15 Description Description USB connector Below items are for P1201n only: Power socket 10 LAN (RJ45 Port for 10/100M Ethernet) S-Video input connector 11 Audio output connector Composite video input connector 18 PC analog signal/HDTV/component video input connector (VGA IN 2) Monitor loop-through output connector Below items are for P1201B/P1201i/P1203PB/ (VGA-Out)
-
Page 16: Control Panel
See the contents in "Turning the Projector On/Off" section. TEMP Temp Indicator LED Four directional select to select items or make keys adjustments to your selection. SOURCE Changes the active source. Empowering key Unique Acer functions: eOpening, eView, eTimer, ePower Management. Downloaded from ProjectorsManual.com Manuals... -
Page 17: Remote Control Layout (P1101/P1201/P1203P/P1206P/ P1303Pw)
Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. This function is not supported in Japanese market. Empowering Unique Acer functions: eOpening, eView, eTimer, ePower Management. KEYSTONE Adjusts the image to compensate for distortion caused by tilting the projector (±... - Page 18 Icon Function Description Four Use up, down, left, right buttons to select items or make directional adjustments to your selection. select keys • MENU Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu.
-
Page 19: Remote Control Layout (P1101C/P1201B/P1203Pb/ P1203Pi/P1201I/P1201N)
Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. This function is not supported in Japanese market. Empowering key Unique Acer functions: eOpening, eView, eTimer, ePower Management. KEYSTONE Adjusts the image to compensate for distortion caused by tilting the projector (±... - Page 20 Icon Function Description • MENU Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. • Confirm your selection of items. PAGE For computer mode only. Use this button to select the next or previous page.
-
Page 21: Getting Started
Getting Started Connecting the Projector (P1101/P1201/ P1203P/P1206P/P1303PW) DVD player, Set-up Box, Video Output HDTV receiver Monitor R B G S-Video Output DVD player R B G RS232 HDTV adapt er RS232 D-Sub HDM I D-Sub Audio Output Screen Description Description Power cord Composite video cable USB cable... -
Page 22: Connecting The Projector (P1101C/P1201B/P1203Pb/ P1203Pi/P1201I/P1201N)
Connecting the Projector (P1101C/P1201B/ P1203PB/P1203Pi/P1201i/P1201n) Video Output S-Video Output DVD player, Set-up Box, HDTV receiver DVD player D-Sub D-Sub R B G RS232 HDTV adapter RS232 D-Sub HDMI D-Sub Audio Output Internet Keyboard Description Description Power cord RS232 cable USB cable Audio cable jack/jack HDMI cable 3 RCA component cable... - Page 23 Note: "*" USB drive limitation, do not support power consumption over 500mA. Please have external power for USB device. Downloaded from ProjectorsManual.com Manuals...
-
Page 24: Turning The Projector On/Off
Turning the Projector On/Off Turning on the Projector Remove the lens cap. (Illustration #1) Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. -
Page 25: Turning The Projector Off
Turning the projector off To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. -
Page 26: Adjusting The Projected Image
Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise the image: Press the elevator foot release. (Illustration #1) Raise the image to the desired height angle (Illustration #2), then release the button to lock the elevator foot into position. -
Page 27: How To Optimize Image Size And Distance
How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/P1203P/ P1206P series Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 69"... - Page 28 P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/ P1203P/P1206P series Screen size Screen size Desired (Min zoom) (Max zoom) Distance From base From base to Diagonal Diagonal to top of top of image <A> (inch) W (cm) x H (cm) (inch) W (cm) x H (cm) image (cm) (cm) <B>...
- Page 29 • P1303PW series Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 82" and 90". P1303PW series Note: Remind as below figure, the space of 135 cm height is required when located at 3m distance. Height: 135cm Form base to top of image...
- Page 30 P1303PW series Screen size Screen size Desired (Min zoom) (Max zoom) Distance From base From base to Diagonal Diagonal to top of top of image <A> (inch) W (cm) x H (cm) (inch) W (cm) x H (cm) image (cm) (cm) <B>...
-
Page 31: How To Get A Preferred Image Size By Adjusting Distance And Zoom
How to get a preferred image size by adjusting distance and zoom P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/ P1203P/P1206P series Height Form base to top of image 2.2 m Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. - Page 32 P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/ P1203P/P1206P series Desired Image Size Distance (m) Top (cm) From base to top of Diagonal (inch) Max zoom Min zoom W (cm) x H (cm) image <A> <B> <C> <D> 61 x 46 81 x 61 102 x 76 122 x 91 142 x 107 163 x 122...
- Page 33 P1303PW series Height Form base to top of image 1.7m 1.8m Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 50" set the projector at a distance 1.7 m and 1.8 m from the screen and adjust the zoom level accordingly.
- Page 34 P1303PW series Desired Image Size Distance (m) Top (cm) From base to top of Diagonal (inch) Max zoom Min zoom W (cm) x H (cm) image <A> <B> <C> <D> 65 x 40 86 x 54 108 x 67 129 x 81 151 x 94 172 x 108 194 x 121...
-
Page 35: User Controls
The new settings will be saved automatically upon exiting the menu. Push the menu button anytime to exit the menu and return to the Acer welcome screen. Downloaded from ProjectorsManual.com Manuals... -
Page 36: Acer Empowering Technology
Acer Empowering Technology Acer Empowering Key provides four Empowering Acer unique functions, they are "Acer eView Management", "Acer eTimer Management" and "Acer eOpening Management" and "Acer ePower Management" respectively. Press " " key for more than one second to launch the Onscreen display main menu to modify its function. - Page 37 Acer ePower Management Press " " to launch "Acer ePower Management". "Acer ePower Management" provides user one shortcut to save lamp and projector life. Please refer to Onscreen Display section for more detail. Downloaded from ProjectorsManual.com Manuals...
-
Page 38: Onscreen Display (Osd) Menus
Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control or control panel. -
Page 39: Color
Color Display Mode There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation with higher brightness. • Standard: For common environment. • Video: For playing video in a bright environment. •... -
Page 40: Image
Tint Adjusts the color balance of red and green. • Press to increase the amount of green in the image. • Press to increase the amount of red in the image. HDMI Color Adjust the color range of the HDMI image data to correct color display error. - Page 41 Use this function to choose your desired aspect ratio. Aspect Ratio • Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. • Full: Resize image to fit full screen by width (1280 pixels) and height (800 pixels).
- Page 42 3D Warning Choose "Yes" to display the 3D warning message. Message Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under HDMI or Video mode. Note: "Sharpness" functions is not supported under HDMI (RGB) or Computer mode. Note: 3D function is supported by VGA source only.
-
Page 43: Management
Management ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. -
Page 44: Setting
Use this function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize picture from "Screen Capture" function. Screen Capture Use this function to customize the startup screen. - Page 45 Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC.
- Page 46 Administrator Password is. • If losing this security card and number, please contact with an Acer service center. Lock User Startup Screen • Default Lock User Startup Screen is "OFF". If lock user startup screen is "ON", users cannot change startup screen anymore...
-
Page 47: Audio
Audio Volume • Press to decrease the volume. • Press to increase the volume. • Mute Choose "On" to mute the volume. • Choose "Off" to restore the volume. • Power On/Off Volume Select this function to adjust the notification volume when turning the projector on/off. -
Page 48: Language
Language Language Choose the multilingual OSD menu. Use the key to select your preferred menu language. • Press to confirm the selection. Downloaded from ProjectorsManual.com Manuals... -
Page 49: Acer Lan Webpage Management
How to login in Open browser and enter the Server IP address by 192. 168. 0.100 to find below homepage of acer LAN webpage management. A password is needed to login in before using. Select a user. Administrator is with high authority that can process more operations such as network setting and alert setting. -
Page 50: Home
Home Home page shows connection status and you can find three main functions listed, Control Panel, Networking Setting and Alert Setting. Note: Control Panel and Network Setting are only for Administrator account. Control Panel Enduser can control and adjust projector setting value via this page. Downloaded from ProjectorsManual.com Manuals... -
Page 51: Network Setting
Network Setting Enduser can set IP address, group name and password as wish. After change network configurations or password, projector will reboot automatically after press "Apply". Note: Group Name and projector Name must be less then 32 characters. Alert Setting Enduser can send mail with error message right away if projector has problem. -
Page 52: Logout
Logout After tap Logout, you will return to login page within 5 seconds. Downloaded from ProjectorsManual.com Manuals... -
Page 53: Appendices
Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem Solution No image appears • Connected as described in the "Getting Started"... - Page 54 Partial, scrolling • Press "RESYNC" on the remote control or control or incorrectly panel. displayed image • For an incorrectly displayed image: (For notebooks) • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings.
- Page 55 Image is stretched When you play a DVD encoded in anamorphic or 16:9 when displaying a aspect ratio you may need to adjust the following "widescreen" settings: DVD title • If you play an Letterbox(LBX) format DVD title, please change the format to Letterbox(LBX) in the projector OSD.
-
Page 56: Osd Messages
OSD Messages Condition Message Reminder Message Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum lifetime. -
Page 57: Problems With The Projector
Problems with the Projector Condition Solution The projector stops responding If possible, turn off the projector, then to all controls unplug the power cord and wait at least 30 seconds before reconnecting power. Lamp burns out or makes a When the lamp reaches the end of its useful popping sound life, it will burn out and may make a loud popping sound. -
Page 58: Led & Alarm Definition Listing
LED & Alarm Definition Listing LED Messages Lamp LED Temp LED Power LED Message Blue Standby (power cord plugged in) Power button ON Lamp retry Quick flashing Turning off Quick (cooling state) flashing Turning off (cooling completed) Error (thermal failure) Error (fan lock failure) Quick flashing... -
Page 59: Replacing And Cleaning The Dust Filters
Replacing and cleaning the dust filters Replacing the dust filters Turn the projector off then unplug the power cord. Pull the both sides dust filters out. (Illustration #1) Clean or replace the dust filter. To put the dust filters back, reverse the previous step. When dust filters are implemented, please set the system to be high altitude mode. -
Page 60: Replacing The Lamp
Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!"... -
Page 61: Ceiling Mount Installation
Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. - Page 62 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B Smaller Washer Large Washer Projector Bracket Supports projector and allows - for adjustments Spacer - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution.
- Page 63 Adjust the angle and positioning as necessary. Tightening Screw Allen K ey Allen K ey Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack.
-
Page 64: Specifications
Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system ® Resolution P1101/P1101C: Native: SVGA (800 x 600) , Maximum: UXGA (1600 x 1200), 1080p(1920x1080) P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/P1203P/ P1206P: Native: XGA (1024 x 768), Maximum:... - Page 65 Power consumption P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi/P1201n/ P1201i: 255 W P1203P/P1206P/P1303PW: 325 W Operating temperature 5ºC to 35ºC / 41ºF to 95ºF Standard package contents • AC power cord x1 • VGA cable x1 • Remote control x1 • Batteries x 2 (for remote control) •...
-
Page 66: Compatibility Modes
Compatibility modes A. VGA Analog VGA Analog - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 640x480 31.47 640x480 37.86 640x480 37.50 640x480 43.27 640x480 119.51 61.60 SVGA 800x600 35.20 800x600 37.88 800x600 48.08 800x600 46.88 800x600 53.67 800x600 119.85 77.20 1024x768 48.36... - Page 67 VGA Analog - Extended Wide timing Modes Resolution V.Frequency [Hz] H.Frequency [KHz] WXGA 1280x768 47.78 1280x768 60.29 1280x768 68.63 1280x720 44.80 1280x800 49.60 1440x900 55.90 1680x1050 65.30 1366x768 47.71 1920x1080-RB 66.60 1920x1080-EIA 66.60 1024x600 37.30 VGA Analog -Component Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz]...
- Page 68 800x600 46.88 800x600 53.67 800x600 119.85 77.20 1024x768 48.36 1024x768 56.48 1024x768 60.02 1024x768 119.804 98.80 1152x864 67.50 1152x864 77.10 1280x1024 64.00 1280x1024 77.90 1280x1024 79.98 1280x1024 91.15 1280x960 75.00 PowerBook G4 640x480 31.50 640x480 66.6(67) 35.00 800x600 37.88 1024x768 48.36 1152x870 68.68...
- Page 69 HDMI - Video Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720x480(1440x480) 59.94(29.97) 27.00 480p 720x480 59.94 31.47 576i 720x576(1440x576) 50(25) 27.00 576p 720x576 31.25 720p 1280x720 45.00 720p 1280x720 37.50 1080i 1920x1080 60(30) 33.75 1080i 1920x1080 50(25) 33.75 1080p 1920x1080 67.50 1080p...
-
Page 70: Regulations And Safety Notices
Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 71: Declaration Of Conformity For Eu Countries
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification... -
Page 72: Declaration Of Conformity
Taipei Hsien 221, Taiwan Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913, www.acer.it... - Page 73 Article 3.2 Spectrum Usages -. EN300 328 -. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2010. Jan. 18, 2011 _______________________________ Easy Lai /Manager Date Regulation Center, Acer Inc. Downloaded from ProjectorsManual.com Manuals...
- Page 74 Acer America Corporation 333 West San Carlos St., San Jose CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the...