Inserting A Memory Card (Sold Separately); Insert The Memory Card - Sony Cyber-Shot DSC-RX10M2 Instruction Manual
Digital still camera
Hide thumbs
Also See for Cyber-Shot DSC-RX10M2:
- How to use manual (261 pages) ,
- Service manual (80 pages) ,
- Manual (261 pages)
Table of Contents
Advertisement
Notes
• The camera will not activate if there is no remaining battery. Insert a sufficiently
charged battery pack into the camera.
• If you use the camera while power is being supplied from a wall outlet (wall
socket), make sure that the icon (
• Do not remove the battery pack while power is being supplied from a wall outlet
(wall socket). If you remove the battery pack, the camera will turn off.
• Do not remove the battery pack while the access lamp (page 10) is lit. The data on
the memory card may be damaged.
• As long as the power is on, the battery pack will not be charged even if the camera
is connected to the AC Adaptor.
• Under certain conditions, power may be supplied from the battery supplementarily
even if you are using the AC Adaptor.
• While power is being supplied via USB connection, the temperature inside the
camera will rise and the continuous recording time may be shortened.
Inserting a memory card (sold separately)
1
Open the cover.
2
Insert the memory card.
• With the notched corner facing as illustrated, insert the memory card
until it clicks into place.
3
Close the cover.
) displays on the monitor.
Ensure the notched corner
faces correctly.
GB
17
Advertisement
Table of Contents
