Table of Contents
Advertisement
PAN/TILT SLOW mode
When you set this function to ON, the PAN/
TILT operation becomes slow. This makes it
easier for the camera to capture a slow
moving subject.
D-ZOOM (digital zoom)
You can set digital zoom to ON or OFF.
When set to OFF, digital zoom does not
operate, and only optical zoom is available.
When set to ON, digital zoom takes over
after optical zoom reaches MAX (×30). Up
to ×360 can be zoomed digitally.
When digital zoom is available, the
resolution decreases.
20
SYSTEM Menu
SYSTEM Menu
IR-RECEIVE (infrared signal
reception)
When this is set to OFF, the camera does not
receive the signal from the supplied infrared
remote commander.
Be sure to keep it set to ON when you use the
supplied infrared remote commander.
Note
You cannot set IR-RECEIVE to OFF when
you operate the menu using the supplied
infrared remote commander. To set it to
OFF, use the appropriate VISCA command.
DISPLAY INFO
When this item is set to ON, the message
automatically appears for about 3 seconds
on the monitor screen, when you perform the
following operations using the supplied
infrared remote commander.
Message
PRESET n: OK
You have stored the
"n" is a preset
camera settings to
position number of
POSITION 1 to 6.
the infrared remote
commander,
between 1 and 6.
RECALL n: OK
You have read the
"n" is a preset
camera settings stored
position number of
in POSITION 1 to 6.
the infrared remote
commander,
between 1 and 6.
Remote control
operation
Hide quick links:
Advertisement
Table of Contents
