Table of Contents
Advertisement
5 Command Line Interface
DGS-1210-28> reset config
% Device will reboot after reset configuration successfully.
DGS-1210-28>
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings:
DGS-1210-28> show ipif
IP Setting Mode
IP Address
Subnet Mask
Default Gateway
DHCPv6 Client State
IPv6 Global Unicast Address: 3ffe:501:ffff:100:100::1/64
DGS-1210-28>
show switch
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the switch information:
To display the configuration of an IP interface on the Switch.
show ipif
The show ipif command displays the current IP address of the
switch.
None.
None.
: Static
: 10.90.90.90
: 255.0.0.0
: 0.0.0.0
: Disabled
To display information about the Switch.
show switch
The show switch command displays the status of the switch.
None.
None.
100
D-Link Web Smart Switch User Manual
Advertisement
Table of Contents
