Table of Contents
Advertisement
● Setting
- Selects trigger type
Set the following value to "TriggerSelector" register. Setting value is Enumeration type.
- Selects trigger mode
Set the following value to "TriggerMode" register. Setting value is Enumeration type.
- Selects trigger source
Set the following value to "TriggerSource" register. Setting value is Enumeration type.
- Grabs image stream by software trigger
When executes "TriggerSoftware" register command, software trigger command is generated. And the
camera starts exposure by receiving software trigger command in software trigger mode.
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
Value
FrameStart(*)
Normal Trigger mode
FrameBurstStart
FrameBurst mode
Value
Off (*)
Normal Shutter Mode
On
Random Trigger Shutter mode
Value
Line0 (*)
Software
49 / 80
Operation Mode
* initial factory setting
Operation Mode
* initial factory setting
Trigger source
Hardware trigger
Software trigger
* initial factory setting
http://www.toshiba-teli.co.jp/index.htm
D4235067D
Advertisement
Table of Contents
