Powering Up - Bosch DIVAR AN 3000 Installation Manual
Hide thumbs
Also See for DIVAR AN 3000:
- Operation manual (170 pages) ,
- Installation manual (54 pages) ,
- Quick reference manual (50 pages)
Table of Contents
Advertisement
DIVAR AN 3000 / DIVAR AN 5000
6.
7.
8.
9.
10. If required, connect a Bosch Intuikey keyboard cable to the KEYBOARD connector using
3.2
Powering up
For the DIVAR AN 3000
1.
2.
3.
4.
For the DIVAR AN 5000
1.
2.
3.
Normal power up
For normal day-to-day operation, leave the rear power switch on, and use the convenient
Power On/Off button on the front of the unit to switch on the system.
Bosch Security Systems
Connect up to 6 ALARM OUT outputs (via the supplied terminal blocks).
Connect a pan/tilt/zoom control unit to the RS-485 or RS-232 port.
Connect to your network via the ETHERNET connector.
Connect extra video out cables to the VIDEO OUT ports if loop through is required to
other devices (only for DIVAR 5000).
the supplied adaptor (only for DIVAR 5000).
Switch on all connected equipment.
Connect the supplied external power adaptor to the AC power outlet.
Connect the DC power cord to the 12 VDC connector on the unit.
Turn on the unit power ON/OFF switch on the rear of the unit.
Switch on all connected equipment.
Connect the power cable to the AC power outlet.
Turn on the unit power ON/OFF switch on the rear of the unit.
Installation Manual
Quick install | en
13
2015.03 | v2.2 | AM18-Q0668
- Quick Links:
- Quick Install
Hide quick links:
Advertisement
Table of Contents
