Table of Contents
Advertisement
10
en | Installation
4
Installation
4.1
Surface mount satellite speaker installation
For safety, ensure the mounting surface supports more than the weight of the speaker. Use
only industry-accepted fasteners and mounting methods when mounting the wall bracket.
Consult an expert if you are unsure.
To install the surface mount satellite speaker, do the following:
1.
2.
3.
4.
For more information, see Safety, page 4.
2015.02 | 03 |
Using a Phillips head screwdriver (not supplied), tighten two (2) M5 pan-head screws
(not supplied) to attach the wall bracket to a secure mounting surface.
Using a Philips screwdriver, tighten two (2) M5 pan-head screws (supplied) to attach the
speaker bracket to the rear of the cabinet.
Place the speaker bracket onto the wall bracket.
Using the hex wrench (supplied), tighten the M6 hex drive pan-head screw to secure the
speaker bracket to the wall bracket.
Installation Manual
LB6 Compact Sound Speaker System
Bosch Security Systems B.V.
Advertisement
Table of Contents
