Samsung 4000 User Manual page 2

Series 4; series 5

Hide thumbs Also See for 4000:

User manual (228 pages)

Quick start manual (16 pages)

Quick setup manual (2 pages)

page of 2

/ 2
Bookmarks

If the TV has no input during the time period set in Auto

y Supported Video Formats

Protection Time, the Screen saver will run.

File

The power-saving mode of some external hard disk drives may

Container

Video Codec

Resolution

Extension

rate(fps)

be released automatically when your connect them to the TV.

If you use a USB extension cable, the TV may not recognize the

Motion JPEG

640x480

USB device or may not be able to read the files on the device.

If a USB device connected to the TV is not recognized, the list of

H.264 BP/

MP/HP

files on the device is corrupted, or a file in the list is not played,

*.avi

connect the USB device to a PC, format the device, and check

*.mkv

H. 264 BP /

the connection.

*.asf

MP / HP

If a file you deleted from the PC is still found when you run Media

*.wmv

Play, use the "Empty the Recycle Bin" function on the PC to

AVI

*.mp4

permanently delete the file.

MKV

Divx 3.11 / 4

*.mov

Photos only supports the sequential jpeg format.

ASF

/ 5 / 6

*.3gp

MP4

The Videos option does not support the scene search and

*.vro

3GP

thumbnail functions.

MPEG4 SP/

*.mpg

MAX 30

ASP

MOV

If the number of files and folders saved on a USB storage device is

*.mpeg

1920x1080

FLV

over approximately 4000, the files and folders may not appear and

*.ts

Window

VRO

some folders may not open.

Media Video

*.tp

VOB

The maximum displayed number of files, including sub folders, in

v9(VC1)

*.trp

one folder of USB storage device is 2000.

*.mov

The media may not be playing smoothly when using the device

*.flv

lower than USB 2.0.

MPEG2

*.vob

*.svi

MPEG1

1/1

*.webm

WebM

VP8

1920x1080

Other Restrictions

y Codecs may not function properly if there is a problem with the

content.

y Video content does not play or does not play correctly if there is

an error in the content or container.

E Pause L Jump T Tools R Return

SUM

1. In the Media Play menu, press the ◄ or ► button to select

y Sound or video may not work if they have standard bit rates/

Videos, and then press the ENTERE button.

frame rates above the TV's compatibility ratings.

2. Press the ◄/►/▲/▼ buttons to select a video in the file list.

y If the Index Table is has an error, the Seek (Jump) function will

not work.

3. Press the ENTERE button or � (Play) button.

y When playing video over a network connection, the video may

The file name is displayed on the top of the screen with the

not play smoothly because of data transmission speeds.

playing time.

y Some USB/digital camera devices may not be compatible with

If video time information is unknown, playing time and the

the TV.

progress bar are not displayed.

y While the TV is playing a video at the bit rate of 10 Mbps or

During video playback, you can search using the ◄ and

higher, the menu screens may be displayed slowly.

► buttons.

✎

In this mode, you can play movie clips contained in a game,

but you cannot play the game itself.

y Supported Subtitle Formats

External

Name

File extension

MPEG-4 timed text

.ttxt

SAMI

.smi

SubRip

.srt

SubViewer

.sub

Micro DVD

.sub or .txt

SubStation Alpha

.ssa

Advanced SubStation Alpha

.ass

Internal

Name

Container

Format

Xsub

AVI

Picture Format

SubStation Alpha

MKV

Text Format

Advanced SubStation Alpha

MKV

Text Format

SubRip

MKV

Text Format

MPEG-4 Timed text

MP4

Text Format

- 9 -

Trouble Powering On

Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button

on the TV or remote and the light should blink about 5 times before the TV turns on.

If you find that you are having trouble powering on your Samsung television, there are a number of things to check it

before making a call to the service department.

y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you

press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your

keyboard or move the mouse. Then try turning your TV on.

If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If

you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a

signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite

box remote control. If the screen displays the guide or info data, the problem is caused by the box.

Stand Assembly

• If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide.

Cannot find a channel

• Re-run Plug & Play or run Auto Program. (go to

- Channel - Auto Program)

Poor Picture

First, perform the Picture Test and to see if your TV is displaying the test image properly.

Go to

- Support - Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to

it did in the store.

deliver HD (high definition) picture quality.

• Cable/Satellite subscribers: Try HD channels from the channel line up.

• Air/Cable Antenna connection: Try HD channels after running Auto Program.

✎

Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up

scaled SD content is low.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted: macroblock

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in

error, small block, dots, pixelization.

sports and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Color is wrong or missing.

• If you're using a component connection, make sure the component cables are connected to the correct jacks.

Incorrect or loose connections may cause color problems or a blank screen.

There is poor color or brightness.

• Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)

• Adjust the Energy Saving option in the TV menu. (go to

- Setup - Eco Solution - Energy Saving )

• Try resetting the picture to the default picture settings. (go to

- Picture - Picture Reset)

There is a dotted line on the edge of

• If the picture size is set to Screen Fit, change it to 16:9.

the screen.

• Change the cable/satellite box resolution.

The picture is black and white.

• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1

on the TV.

When changing channels, the picture

• If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It

freezes or is distorted or delayed.

may take up to 20 minutes)

• Set the output resolution of the cable box to 1080i or 720p.

Sound Problems

Perform the Sound Test to confirm that your TV audio is properly operating.

(go to

- Support - Self Diagnosis - Sound Test)

If the audio is OK, the sound problem may be caused by the source or signal.

There is no sound or the sound is too

• Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

low at maximum volume.

The picture is good, but there is no

• If you are using an external device, check the device's audio output option Ex. you may need to change your

sound.

cable box's audio option to HDMI if the box is connected to your TV using an HDMI cable.

• Reboot the connected device by reconnecting the device's power cable.

The speakers are making an

• Check the cable connections. Make sure a video cable is not connected to an audio input.

inappropriate noise.

• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

• Perform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on.

• Make sure the AC power cord is securely plugged into the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the

POWER

button on the TV to make sure the problem is not the remote.

If the TV turns on, refer to 'Remote control does not work' below.

The TV turns off automatically.

• Ensure the Sleep Timer is set to Off in the Time menu.

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged securely into the wall outlet and the TV.

• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes

if there is no signal.

- 13 -

Photos

Video Decoder

Frame

Bit rate

Audio

Supports up to H.264, Level 4.1

Normal

(Mbps)

Codec

H.264 FMO / ASO / RS, VC1 / AP L4 are not supported.

GMC 2 or above is not supported.

Audio Decoder

WMA 10 Pro supports up to 5.1 channels. Supports up to the M2

profile. WMA lossless audio is not supported.

QCELP and AMR NB/WB are not supported.

AC3

LPCM

Vorbis is supported for up to 2 channels.

ADPCM

1. In the Media Play menu, press the ◄ or ► button to select

SUM

Dolby Digital Plus is supported for up to 5.1 channels.

(IMA, MS)

Photos, then press the ENTERE button.

AAC

The DTS LBR codec is only available for MKV / MP4 /TS

HE-AAC

2. Press the ◄/►/▲/▼ buttons to select a photo in the file list.

containers.

WMA

3. Press the ENTERE button or � (Play) button.

DD+

Music

MPEG(MP3)

✎

NOTE

DTS (Core ,

While a photo list is displayed, press the � (Play) / ENTERE

LBR)

I Love You.

mp3

Playlist

3/15

button on the remote control to start a slide show.

G.711(A-

1st Album

I Love you

Pop

Jhon

All files in the file list section will be displayed in the slide show.

Law, μ-Law)

2010

Music 1

4.2MB

During the slide show, files are displayed in order.

No Singer

Music 2

No Singer

During the slide show, you can adjust the slide show speed

Music 3

using (π) (REW) or (µ) (FF) button.

No Singer

01:10 / 04:02

Music 4

You can move to other files using ◄ or ► button.

No Singer

Music 5

✎

Media Play can play Music files automatically during a Slide

No Singer

Show if Background Music is set to On.

6~30

Vorbis

E Pause L Jump T Tools R Return

USB

✎

You cannot change the Mode in Background Music until the

1. In the Media Play menu, press the ◄ or ► button to select

Background Music file has finished loading.

Music, and then press the ENTERE button.

y Supported Photo Formats

2. Press the ◄/►/▲/▼ buttons to select the desired Music in the

file list.

3. Press the ENTERE button or � (Play) button.

✎

During music playback, you can search using the ◄ and

► button.

Other Restrictions

✎

� (REW) and μ (FF) buttons do not function during

y CMYK, YCCK Color space JPEG are not supported.

play.

✎

Media Play only displays files with MP3 and PCM file

Playing Multiple Files

extension. Other file extensions are not displayed, even if they

■ Playing selected video/music/photo files

are saved on the same USB device.

1. On the File List screen, highlight a file, and then press the Yellow

✎

If the sound is abnormal when playing MP3 files, adjust the

button on your remote.

Equalizer in the Sound menu. (An over-modulated MP3 file

may cause a sound problem.)

2. Repeat Step 1 to select multiple files.

✎

NOTE

A c mark appears to the left of the selected files.

To cancel a selection, press the Yellow button again.

To deselect all selected files, press the

Deselect All, and then the ENTERE button.

3. Press the

then press the ENTERE button.

■ Playing a video/music/photo folder

1. With the folders on your USB device displayed, use the

◄/►/▲/▼ buttons to highlight a folder.

2. Press the

the

- 10 -

There is no picture/video.

• Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

• Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV

input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the correct input source by pressing the

• Reboot the connected device by reconnecting the device's power cable.

RF (Cable/Antenna) Connection

The TV is not receiving all channels.

• Make sure the coaxial cable is connected securely.

• Run Auto Program to add available channels to the channel list.

go to

- Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set

in the menu. There are 3 options. (STD, HRC and IRC)

• Verify the antenna is positioned correctly.

No Caption on digital channels.

• Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.

• Some channels may not have caption data.

The picture is distorted: macroblock,

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in

error, small block, dots, pixelization.

sports and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and

• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-

buzzing noise from the TV speakers with

top-box has a grounding issue. Replace the Component video cables with an HDMI connection.

Component cable connection.

The picture will not display in full screen.

• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

• Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the

TV.

• Adjust the picture size option on your external device or change the TV to full screen.

The remote control does not work.

• Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct .

• Clean the transmission window located on the top of the remote control.

• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for

does not turn the TV on or off, or adjust

the SAMSUNG TV code.

the volume.

A "Mode Not Supported" message

• Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to

appears.

resolution settings in this manual.

Caption on the TV menu is greyed out.

• You cannot select Caption in the TV menu when watching content from a device connected via HDMI or

Component.

• Caption must be activated on the external device.

There is a plastic smell from the TV.

• This smell is normal and will dissipate in a few days.

TV Signal Strength is unavailable in the

• This function is only available for digital channels received through an Antenna / RF/Coax connection.

Self Diagnosis Test menu.

TV is tilted to the right or left side.

• Remove the stand base from the TV and reassemble it.

The Channel menu is grey out

• The Channel menu is only available when you select the TV source.

(unavailable).

Your settings are lost after 30 minutes or

• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from

every time the TV is turned off.

Store Demo mode to Home Use mode using the Plug & Play procedure. Press the

TV mode, go to

→ Setup → Plug & Play → ENTERE.

You have intermittent loss of audio or

• Check the cable connections and reconnect them.

video.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible

enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree

connectors.

You see small particles when you look

• This is part of the product's design and is not a defect.

closely at the edge of the frame of

•

the TV.

POP (TV's internal banner ad) appears

• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

on the screen.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may

be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

✎

Watch these troubleshooting on video at www.samsung.com/spsn.

✎

Some functions and pictures shown in this manual are available on specific models only.

✎

You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com

→ Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,

insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.

- 14-

Media Play - Additional Functions

■ Videos/Music/Photos Play Option menus

Image1024.jpg

1024x768

2010/2/1

3/15

When playing a file, press the

TOOLS

button.

Category

Operation

You can select another video file

Title

to play directly.

Repeat Mode You can play movie and music

files repeatedly.

You can adjust the picture size to

Picture Size

your preference.

E Pause L Previous/Next T Tools R Return

Picture Mode You can adjust the picture setting.

Sound Mode You can adjust the sound setting.

You can play the video with

Subtitle

Subtitles. This function only works

Settings

if the subtitles have the same file

name as the video.

You can select the digital audio

Audio Format

output format.

You can change the audio

Audio

language if the video has more

Language

than one language.

Stop Slide

Show /

You can start or stop a Slide

Start Slide

Show.

Show

Slide Show

You can select the slide show

Speed

speed during the slide show.

You can set and select

Background

background music when

Music

watching a Slide Show.

You can zoom into images in full

Zoom

Image

Photo

Resolution

screen mode.

Base-line

15360 x 8704

You can rotate images in full

Rotate

JPEG

screen mode.

Progressive

1024 x 768

You can see detailed information

Information

about the played file.

Settings

Using the Setup Menu

■ DivX® Video On Demand: Shows the registration code

authorized for the TV. If you connect to the DivX web site and

the VOD activation file. Once you play it using Media Play, the

registration is completed.

✎

For more information on DivX® VOD, visit "http://vod.divx.

com".

■ Information

Select to view information about the connected

TOOLS

button, select

USB device.

Other Information

TOOLS

button, select Play Selected Contents, and

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on

the wall.

For detailed information about installing the wall mount, see

TOOLS

button, select Play Folder, and then press

the instructions provided with the wall mount items. Contact a

technician for assistance when installing the wall mount bracket.

ENTERE

button

Samsung Electronics is not responsible for any damage to the

product or injury to yourself or others if you elect to install the wall

mount on your own.

Wall mount

bracket

Storage and Maintenance

✎

If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching

the TV.

✎

button on the remote control.

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using

SOURCE

a soft cloth to prevent scratches.

Do not spray water directly onto the

product. Any liquid that goes into the

product may cause a failure, fire, or

electric shock.

License

This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.

To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the

DivX VOD section of your device setup menu.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.

This device supports DivX Plus Streaming® for enjoying HD movies and TV shows with advanced features

(multi-language subtitles, multiple audio tracks, chapters, smooth FF/RW, etc.) streamed to your device.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS,

the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS,

the Symbol, DTS in combination with the Symbol, and DTS Studio Sound are registered trademarks or

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

Open Source Announcement

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).

SOURCE

button to select

Wall Mount Kit Specifications (VESA)

Kensington Lock

✎

The wall mount kit is not supplied, but sold separately.

The Kensington Lock is not supplied by Samsung. It is a device

Install your wall mount on a solid wall perpendicular to the floor.

used to physically fix the system when using it in a public place.

When attaching to other building materials, please contact your

Refer to the manual provided with the Kensington Lock for additional

nearest dealer. If you install the TV on a ceiling or slanted wall, it

information on proper use.

Videos

Music

Photos

may fall and result in severe personal injury.

✎

Please find a "K" icon on the rear of the TV. The Kensington

✎

NOTE

slot is beside the "K" icon.

Standard dimensions for wall mount kits are shown in the table

✎

The position and color may differ depending on the model.

below.

When purchasing our wall mount kit, a detailed installation

manual and all parts necessary for assembly are provided.

Do not use screws that do not comply with the VESA standard

screw specifications.

Do not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set.

For wall mounts that do not comply with the VESA standard

screw specifications, the length of the screws may differ

depending on the wall mount specifications.

Do not fasten the screws too firmly. This may damage the

product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

Samsung is not liable for product damage or personal injury

when a non-VESA or non-specified wall mount is used or the

consumer fails to follow the product installation instructions.

Do not mount the TV at more than a 15 degree tilt.

Always have two people mount the TV on a wall.

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit

VESA screw hole

Product

TV size in

Standard

specs (A * B) in

C (mm)

Quantity

samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Family

inches

Screw

millimeters

Problem

LED-TV

200 X 200

31.3 ~ 32.3

Flickering and Dimming

Do not install your Wall Mount Kit while

your TV is turned on. It may result in

Component Connections /

personal injury due to electric shock.

Screen Color

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV

may cause the TV to fall. In particular, ensure that your

children do not hang over or destabilize the TV; doing

so may cause the TV to tip over, resulting in serious

injuries or death. Follow all safety precautions provided

Screen Brightness

on the included Safety Flyer. For added stability, install

the anti-fall device for safety purposes, as follows.

To prevent the TV from falling

Unwanted Powering off

✎

Since the necessary brackets, screws, and string or cable are

not supplied, please purchase these separately.

1. Insert the screws into the wall brackets and firmly fasten them to

the wall. Make sure the screws are firmly fixed to the wall.

✎

We strongly recommend you drive the screws into a stud.

2. Using screws, insert the screws through the TV brackets, and

then fasten the screws to the top VESA screw holes on the back

of the TV.

3. Connect the brackets on the TV and the brackets on the wall

with a strong string or cable, and then tie the string or cable

tightly to the brackets.

✎

Verify all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have

any doubt about the security of your connections, contact a

Wall mount

professional installer.

Adapter

✎

Install the TV close to the wall so that it does not fall.

✎

Connect the string or cable so that the brackets on the wall

are at the same height or lower than the brackets on the TV.

Untie the string or cable before moving the TV.

✎

To purchase a TV Holder kit, contact Samsung customer care.

- 11 -

Specifications

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Clean the product with a soft cloth

Model Name

dampened with in a small amount of

water. Do not use a flammable liquid

Display Resolution

(e.g. benzene, thinners) or a cleaning

Screen Size

agent.

(Diagonal)

Sound

Output

Dimensions (W x H x D)

Body

With stand

Weight

Without Stand

With Stand

✎

Design and specifications are subject to change without prior notice.

✎

This device is a Class B digital apparatus.

✎

For information about the power required and more about power consumption, refer to the label attached to the product.

✎

Typical power consumption is measured according to Energy Star Program requirements for televisions.

✎

Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.

samsung.com/recyclingdirect or call, (877) 278-0799.

■ JACK PANEL DETAIL / REAR VIEW

UN32J4000/UN32J400D

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions

prior to performing installation of your TV. Not responsible for typographical or printed errors.

- 15 -

Display Modes (HDMI/DVI Input)

Optimal resolution: 4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz

Horizontal

Vertical

Pixel Clock

Sync

Mode

Resolution

Frequency

Polarity

(KHz)

(Hz)

(MHz)

(H / V)

640 x 350

31.469

70.086

25.175

+/-

IBM

720 x 400

31.469

70.087

28.322

-/+

640 x 480

35.000

66.667

30.240

-/-

MAC

832 x 624

49.726

74.551

57.284

-/-

1152 x 870

68.681

75.062

100.000

-/-

640 x 480

31.469

59.940

25.175

-/-

640 x 480

37.861

72.809

31.500

-/-

640 x 480

37.500

75.000

31.500

-/-

800 x 600

37.879

60.317

40.000

+/+

800 x 600

48.077

72.188

50.000

+/+

800 x 600

46.875

75.000

49.500

+/+

1024 x 768

48.363

60.004

65.000

-/-

1024 x 768

56.476

70.069

75.000

-/-

1024 x 768

60.023

75.029

78.750

+/+

VESA DMT

1152 x 864

67.500

75.000

108.000

+/+

1280 x 720

45.000

60.000

74.250

+/+

1280 x 800

49.702

59.810

83.500

-/+

1280 x 1024

63.981

60.020

108.000

+/+

1280 x 1024

79.976

75.025

135.000

+/+

1366 x 768

47.712

59.790

85.500

+/+

1440 x 900

55.935

59.887

106.500

-/+

1600 x 900RB

60.000

108.000

+/+

1680 x 1050

65.290

59.954

146.250

-/+

1920 x 1080

67.500

60.000

148.500

+/+

Possible Solution

If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient

features like the Energy Saving feature. Follow the steps below with your remote to turn these features off or on.

y Energy saving : MENU → Setup → Eco Solution → Energy Saving →Select Settings

If you find that the color on your Samsung television's screen is not correct or black and white, first run a Self

Diagnosis Test on the TV to make sure there are no device issues.

y Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test

y If the test is ok, try making sure ;

y Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have

used the AV Out jack on your video source.

y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the

video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings

you should check before calling for a repair.

y Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to "Picture" in the Menu, and then try

adjusting these options.

If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco

friendly No Signal Power Off feature.

First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on

knowing that it will turn off after a certain period of time and not waste energy.

y Sleep Timer : User Menu → Setup → Time → Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

y No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power

y Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off

- 12 -

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C )

5% to 95%, non-condensing

UN32J4000/UN32J400D

UN32J5003

1366 x 768

1920 x 1080

32" Class

(31.5" measured diagonally)

10 W

29.3 x 17.4 x 2.7 inches

29.1 x 17.1 x 2.7 inches

(745.4 x 442.2 x 69.0 mm)

(741.0 x 436.0 x 69.0 mm)

29.3 x 18.2 x 5.9 inches

29.1 x 18.4 x 5.7 inches

(745.4 x 463.1 x 150.5 mm)

(741.0 x 468.7 x 145.5 mm)

8.1 lbs (3.7 kg)

8.0 lbs (3.66 kg)

8.3 lbs (3.8 kg)

8.2 lbs (3.74 kg)

Model name

4.5

10.7

4.7

8.0

UN32J5003

4.2

10.6

4.7

7.9

- 16 -

1366 x

1920 x

768

1080

(Unit: inches)

6.6

6.4

This manual is also suitable for:

400d5003Un32j400dafUn32j5003Series 45

Samsung 4000 User Manual page 2

Related Manuals for Samsung 4000

Related Products for Samsung 4000

This manual is also suitable for: