DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
with 3G/CDMA/LTE Support and USB Port
User Manual
Wi-Fi
In this menu you can specify all needed settings for your wireless network.
Basic Settings
On pages of the Wi-Fi / Basic settings section, you can enable your wireless local area network
(WLAN) and configure its basic parameters. To configure the 2.4GHz band or 5GHz band, proceed
to the relevant page.
2.4GHz Band
Figure 109. Basic settings of the wireless LAN in the 2.4GHz band.
Parameter
Enable Wireless
Broadcast wireless
network
BSSID
The checkbox enables Wi-Fi connections in the 2.4GHz. If you want
to disable your WLAN in this band, deselect the checkbox.
If the checkbox is not selected, devices cannot connect to the router's
2.4GHz band WLAN. Upon that the router can connect to another
access point as a wireless client.
The unique identifier for your Wi-Fi network (for the 2.4GHz and
5GHz band). You cannot change the value of this parameter, it is
determined in the device's internal settings.
Page 129 of 220
Configuring via Web-based Interface
Description