Sanyo CDF-R800 Service Manual page 2
Multi control cd receiver
Hide thumbs
Also See for CDF-R800:
- Operating instructions manual (27 pages) ,
- Operating instructions manual (28 pages)
Table of Contents
Advertisement
DISASSEMBLY
TOP CHASSIS
I
MAIN PCB
d
1.Push up the rear right part of the top chassis.
Then the top chassis will come off.
PANEL ASSY
1.Unhook
the Panel's stoppers located on both the left and
right sides and the center bottom.Then
the panel assy will
come off.
CD MECHANISM
1.Remove
4 screws@
fixing the mechanism
in the chassis.
Disconnect the main PCB'S FPC from the mechanism's
soket,Then the mechanism will come off.
1.Remove 3 screws@)
and 2 screws ~
securing the heat
sink.
2. Remove the Base and Special screw.
3. Remove 2 screws @) and 1 screw@
fixing the front
chassis to the chassis.
4. Remove 1 screw@
securing the IC - bracket.
5. Remove the solder on the wire which connects the main
PCB and the chassis.Then
the main PCB will come off.
"d
HANISM
A
'e'
–l–
- Quick Links:
- Wiring Diagram
Hide quick links:
Advertisement
Table of Contents
