Glass Cooktop - GE PHP900 Owner's Manual
Electronic
Hide thumbs
Also See for PHP900:
- Owner's manual (72 pages) ,
- Technical service manual (35 pages) ,
- Installation instructions manual (33 pages)
Table of Contents
Advertisement
Available languages
Available languages
Cleaning the glass cooktop.
Clean your cooktop after
each spill. Use CERAMA
®
BRYTE
Ceramic Cooktop
Cleaner.
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops or a
Scotch-Brite
®
Multi-Purpose No
Scratch blue scrub pad.
The CERAMA BRYTE
®
Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts
Center. See instructions under
"To Order Parts" section on
next page.
NOTE: Do not use a dull or
nicked blade.
16
Normal Daily Use Cleaning
Use CERAMA BRYTE
Ceramic Cooktop
®
Cleaner on the glass cooktop.
To maintain and protect the surface of
your glass cooktop, follow these steps:
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner.
This helps protect the top and makes
cleanup easier.
Daily use of CERAMA BRYTE
Cooktop Cleaner will help keep the
cooktop looking new.
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other
than the pad included with your cooktop.
Allow the cooktop to cool.
Spread a few drops of CERAMA
BRYTE
Ceramic Cooktop Cleaner
®
on the entire burned residue area.
Using the included CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops,
rub the residue area, applying
pressure as needed.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximately a 45°
angle against the glass surface
and scrape the soil. It will be
necessary to apply pressure
to the razor scraper in order
to remove the residue.
After scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE
®
Ceramic Cooktop
Cleaner on the entire burned residue
area. Use the CERAMA BRYTE
Cleaning Pad to remove any
remaining residue.
Shake the cleaning cream well. Apply
a few drops of CERAMA BRYTE
Ceramic Cooktop Cleaner directly
to the cooktop.
Use a paper towel or CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
Use a dry cloth or paper towel to
remove all cleaning residue. No
need to rinse.
®
Ceramic
NOTE: It is very important that you DO
NOT heat the cooktop until it has been
cleaned thoroughly.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE
®
and a paper towel.
®
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE
®
and a paper towel.
®
®
Ceramic Cooktop Cleaner
Ceramic Cooktop Cleaner
®
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
