Turning Do Not Disturb On And Off; Trace Call: Identifying Anonymous Callers (Not For U.s.); Turning The Microphone On And Off - Siemens HiPath 3000 Operating Instructions Manual
Hide thumbs
Also See for HiPath 3000:
- Service manual (1144 pages) ,
- Operating instruction (176 pages) ,
- User manual (165 pages)
Table of Contents
Advertisement
Making and Answering Calls
Step by Step
FB@
GB@ L
or
Consultation
Mute
14
Turning Do Not Disturb On and Off
You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is acti-
vated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this pur-
pose (contact the service personnel).
C
Lift the handset.
Enter the code for "on" or "off".
Trace Call: Identifying Anonymous
Callers (Not for U.S.)
You can have the carrier identify malicious external call-
ers. You can save the caller's station number during the
call or for 30 seconds after the call ends. However, it is
essential that you do not replace your handset during
this time.
H
You are engaged in an external call.
Press the key. LED flashes. Enter the code.
FA=
Turning the Microphone On and Off
To prevent the other party from listening in while you
consult with someone in your office, you can temporari-
ly switch off the handset microphone or the handsfree
microphone.
Precondition: You are conducting a call. The
microphone is switched on.
Press the key. The LED lights up.
When you lift the handset, a special dial tone
(continuous buzzing) reminds you that "do not
disturb" is active.
Authorized internal callers can automatically
override the "do not disturb" function after five
seconds.
After you have finished tracing the call, the data
is stored on the carrier's system. Now contact
the service personnel.
Advertisement
Table of Contents
