Table of Contents
Advertisement
Option 3: Optional 3-wire
connection.
• If your local codes or ordinances
do not allow the
connection
of a frame-grounding
conductor
to the
neutral wire, use the instructions
under this
section.
1. Remove center terminal
block screw.
2. Remove appliance
neutral ground wire (white)
from external ground connector
screw. Connect
appliance
ground wire and the neutral wire (white
or center wire) of power supply cord/cable
under
center, silver colored terminal
block screw.
Tighten screw.
3. Connect the other wires to outer terminal block
screws. Tighten screws.
o
o
©
a.
External ground connector
b.
Neutral grounding
wire (white)
c.
Neutral wire (white or center wire)
d.
Grounding path determined by a qualified electrician
4. Tighten strain relief screws.
5. Insert tab of terminal block cover into slot of
dryer rear panel. Secure cover with hold-down
screw.
6. Connect
a separate
copper ground wire from the
external ground connector
screw to an adequate
ground.
18
- Quick Links:
- Using Your Dryer
Hide quick links:
Advertisement
Table of Contents
