Connect Input/Output Cables
Note:
Route all cables to ensure they are protected from jostling, tugging or being disconnected by passing objects.
The cradle must be receiving power from an external power source before HX3 battery charging can begin.
USB Cable
Prerequisite: The steps outlined in
source.
The cradle provides 5V to the USB Host connector (0.5A) to allow interfacing with an external USB keyboard or USB pointing
device through the cradle.
USB Client connections do not receive power through the cradle.
Requires Cable Type:
1. USB A Host e.g., scanner
2. USB B Client e.g., Activesync cable
Ensure there is a stable source of power applied to the external device. Turn the device On.
Connect the USB-A (Host - left connector) or USB-B (Client - right connector) plug to the appropriate receptacle at the bottom
front of the cradle.
The USB connected external device and HX3 communication is available.
Connect the Power Cable
have been completed and the cradle has a dependable power
2-7