Table of Contents
Advertisement
Chapter 4 – System Installation
PRE-INSTALLATION
REQUIREMENTS
NETWORK NAMES
Table 4-1 Network Names
IPedge Name
Enterprise Name
Server Name
Community Name
Host Name
Installation Manual
August, 2011
Refer to the
IPedge Hardware
environment, and UPS requirements. Refer to the LAN Requirements
chapter for network performance specifications and measurement tools.
Before starting this procedure the following information is required for
each IPedge server.
•
IP Addresses
–
IPedge EC and EM servers require two Static IP addresses
•
IPedge server LAN
•
IPedge Server IPMI connection
–
IPedge EP servers require one Static IP address - server LAN
•
Netmask
•
Broadcast address
•
Network Time Protocol source
•
Host name
•
Default Gateway IP address
•
DNS server IP address
The network names shown in the table below are assigned during the
server installation process.
The names use alpha-numeric characters (A ~ Z, a ~ z and 0 ~ 9) and are
case sensitive. For example: NorthTower012.
Primary Node
Member Node
Required
Recommended
Required
Required
Required
Required
Required
Required
Descriptive names are recommended. Names could show location by city,
campus location or server room and rack location.
chapter in this document for power,
Notes
Domain name of this enterprise. Assign
the same Enterprise name to all nodes.
Unique, descriptive name of the server.
Register this name in the DNS server.
Unique, descriptive name - Used as
authentication by internal processes.
Same as the Server name - This will be
also used be for the Meeting server.
4-1
Hide quick links:
Advertisement
Table of Contents
