Advertisement
Note:
¡ To prevent from damage to the unit, be sure to follow the wiring diagrams below.
¡ Be sure to fully plug in the connectors. Secure them with clamps and tapes.
¡ All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer or
your dealer if other methods are required.
: This book refers to connections to the Panasonic car navigation system that will come onto the market in the
future. Descriptions regarding the car navigation system are boxed with a dotted line.
External Remote Control Lead (Brown/black stripe)
Motor Antenna Relay Control Lead (Blue)
(To motor antenna) (Max. 100 mA)
This lead is not intended for use with a switch actuated power
antenna.
Side Brake (Parking Brake) Connection Lead (Bright green)
Be sure to wire the side brake (parking brake) for safety and pre-
venting accidents.
(a
page 10)
SIDE BRAKE
External Amplifier Control Power Lead (Blue/white stripe)
To an external amplifier.
Reverse Lead
(Violet/white stripe)
When connecting the rear view camera, use the reverse
lead.
(a
page 11)
Power Lead (Red)
To ACC power, +12 V DC.
ACC
Battery Lead (Yellow)
To the car battery, continuous +12 V DC.
BATTERY 15A
Ground Lead (Black)
To a clean, bare metallic part of the car chassis
u
Power Connector
Front Right + (Gray)
Front Right – (Gray/black stripe)
Front Left + (White)
Front Left – (White/black stripe)
Rear Right + (Violet)
Rear Right – (Violet/black stripe)
Rear Left + (Green)
Rear Left – (Green/black stripe)
Speaker connections
• Do not connect more than one speaker to one set of
speaker leads (except for connecting to a tweeter).
Use of speakers which do not match the speci-
fications can cause burning, smoking or dam-
age of the speakers.
• Do not use a 3-wire type speaker system having a
common earth lead.
8
9
CQ-VW120W
Advertisement
