Config Ipif System; Logout - D-Link DGS-1210-28 Reference Manual
Web smart switch
Hide thumbs
Also See for DGS-1210-28:
- Manual (171 pages) ,
- Reference manual (113 pages) ,
- Reference manual (109 pages)
Table of Contents
Advertisement
5 Command Line Interface
S uc c es s .
DGS-1210-28>
config ipif system
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the IPv6 interface System:
DGS-1210-28> c onfig ipif S ys tem ipv6 ipv6addres s 3ffe:501:ffff:100::1/64
S uc c es s .
DGS-1210-28>
logout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To terminate the current user's console session:
DGS-1210-28> logout
To configure the System IPv6 interface.
config ipif system { ipv6 ipv6address <ipv6networkaddr> |
dhcpv6_client [enable | disable] }
The c onfig ipif s ys tem command configures the System IPv6
interface on the Switch.
ipv6 ipv6address <ipv6networkaddr> − Use this parameter to
statically assign an IPv6address to this interface. This address
should define a host address and a network prefix length.
Multiple IPv6 addresses can be configured for a single IP
interface. Ex: 3ffe:501:ffff:100::1/64. The /64 represents the prefix
length of the IPv6 addresses.
dhcpv6_client [enable | disable] − Specify the DHCPv6 client to
be disabled or enabled.
None.
To log out a user from the Switch's console.
logout
The logout command terminates the current user's session on
the Switch's console.
None.
None.
NOTE: Save your configuration changes before
logging out.
86
D-Link Web Smart Switch User Manual
- Quick Links:
- Management Options
- Using Web-Based Management
Hide quick links:
Advertisement
Table of Contents
