Connect A Bluetooth Scanner Ds3578 Directly To The Vc70 (Spp Profile) - Motorola VC70N0 Product Reference Manual
Vehicle computer
Hide thumbs
Also See for VC70N0:
- Quick reference manual (61 pages) ,
- Quick reference manual (43 pages) ,
- Product reference manual (200 pages)
Table of Contents
Advertisement
Connect a Bluetooth Scanner DS3578 Directly to the VC70 (SPP Profile)
NOTE To improve performance, use StoneStreet one Bluetooth stack.
To connect a Bluetooth scanner to the VC70:
Ensure that the scanner battery is fully changed.
1.
Scan the
2.
Set All Defaults
Set All Defaults Bar Code
Figure 5-67
NOTE The Set All Defaults Bar Code allows the scanner to reset from any previous configuration to the default
configuration.
Scan a
bar code to configure the scanner to Bluetooth SPP profile mode before the pairing.
3.
SPP Profile
SPP Profile Bar Code
Figure 5-68
Scan Write to Custom Defaults bar code.
4.
Custom Default Bar Code
Figure 5-69
To pair the scanner with your VC70, scan the pair label bar code on the upper right side of the VC70.The
5.
scanner beeps indicating that it is successfully connected to the VC70.
Enter the following configuration details:
6.
•
Tap
> Programs > BTScannerCtlPanel
•
Check
BT Scanner
•
Select Comm port
COM9
•
Tap
and
Save
Exit
To pair the scanner with your VC70, scan the pair label bar code on the upper right side of the VC70.The
7.
scanner beeps indicating that it is successfully connected to the VC70.
NOTE Do note close the
DataWedge application must remain active.
bar code.
DataWedge application. To enable bar code scanning through TelnetCE, the
TelnetCE Configuration 5 - 53
- Quick Links:
- Resetting the Vehicle Computer
Hide quick links:
Advertisement
Table of Contents
