Yamaha YZF-R1 Owner's Manual page 34
Hide thumbs
Also See for YZF-R1:
- Service manual (808 pages) ,
- Owner's manual (130 pages) ,
- Manual (82 pages)
Table of Contents
Advertisement
INSTRUMENT AND CONTROL FUNCTIONS
Right
1
2
3
3
1. Engine stop switch "
2. Drive mode switch "MODE"
3. Start switch "
"
Hazard switch
1. Hazard switch "
"
Pass switch "
"
Press this switch to flash the head-
lights.
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
/
"
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
1
Press this switch to sound the horn.
Traction control system switch
"TCS"
This switch is used to select the trac-
tion control system modes.
See "Traction control system" on page
3-22 for detailed information.
EAU12381
EAU12401
/
"
" for the high
" for the low beam.
EAU12461
/
"
". To signal a left-hand
". When
EAU12501
"
EAU51842
3-19
Engine stop switch "
/
Set this switch to "
" before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter. See page 5-1 for start-
ing instructions prior to starting the en-
gine.
The engine trouble warning light will
come on when the key is turned to
"ON" and the start switch is pushed,
but this does not indicate a malfunc-
tion.
Hazard switch " "
With the key in the "ON" or "
tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
turn signal lights).
EAU12661
"
" to
EAU12712
EAU41701
EAU12734
" posi-
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
