Disk Diagnostics - D-Link DNS-321 User Manual

D-link dns-321 disk storage system

Hide thumbs Also See for DNS-321:

User manual (73 pages)

Quick install manual (13 pages)

Quick install manual (17 pages)

Table Of Contents

Table of Contents

Section 3 - Configuration

S.M.A.R.T stands for "Self-Monitoring, Analysis, and Reporting

Technology". This is a system on a hard drive used to monitor and

report on the health of the drive. If the HD is grayed out, then it does

not support S.M.A.R.T.

Quick Test:

Runs a quick S.M.A.R.T test. The test usually takes

less than 10 minutes. This test will check the electrical,

mechanical, and read performance of the hard drive.

The results are displayed as Passed/Failed on the web

UI and can also be sent as an e-mail alert.

Extended Test:

Runs an extended S.M.A.R.T test. This test requires

a lot more time to complete. However, it is a more

thorough and complete test when compared to the

Quick Test.

Send Result By

Enable this function in order to have the results of the

E-mail:

S.M.A.R.T test sent to you by e-mail.

Create Schedule:

Click this button in order to create a scheduled

S.M.A.R.T test. You will be able to schedule a test on

a daily, weekly, and monthly basis.

Scan Disk:

Scan Disk will scan your system's file system for errors

and/or corruption. After completion, any errors on your

file system will be displayed accordingly.

To run the S.M.A.R.T test, select the hard drive you

wish to perform the S.M.A.R.T test on. Then select

whether to run a Quick or Extended S.M.A.R.T test.

Then press Start to run the test.

D-Link DNS-321 User Manual