Table of Contents
Advertisement
Section 2 - Installation
3. Second Adapter
Within two minutes of pushing the Simple connect button of the first adapter, Press the Simple connect button of second
adapter in your Powerline network for no more than three seconds. The Power LED will start blinking after you release the
button.
Note: Both Simple connect buttons must be pressed within two minutes.
Your Powerline network is now securely configured with the same network encryption key. The adapters will remember the
security settings even if they are unplugged.
Note: To change the private encryption key, please reset the adapter back to its default value by pressing the Simple Connect
button for 10 seconds and then follow the security setup procedure above.
4. Adding More Adapters
If you would like to add more than two adapters, press the Simple connect button of the additional adapter for no more than
three seconds. The Power LED will start blinking after you release the button.
Then press the Simple connect button of any adapter in your existing Powerline network for no more than three seconds. The
Power LED will start blinking after you release the button.
Note: Both Simple connect buttons must be pressed within two minutes.
Now your new adapter will be able to connect to your existing Powerline network.
D-Link DHP-P338AV User Manual
11
Hide quick links:
Advertisement
Table of Contents
