Panasonic UF-9000 Service Handbook page 35
Facsimile
Hide thumbs
Also See for UF-9000:
- Service manual (375 pages) ,
- Operating instructions manual (66 pages) ,
- Service manual (296 pages)
Table of Contents
Advertisement
2.5.2.
Updating through a LAN Port (The Quickest and Most Easiest Method)
The firmware code can be easily updated when the main unit is connected to a LAN.
The Network Firmware Update Tool can also be used by connecting to the machine using a crossover
cable, if the unit is not connected to a LAN.
1) Install the Network Firmware Update Tool to your PC
The option CD-ROM includes the Network Firmware Update Tool and the Main Unit Firmware Code.
Please refer to the following Operating Instructions to install the Network Firmware Update Tool.
The installation password is "workio".
Operating Instructions:
\xFirmware\Tools\NwFirmup\NwFirmup OI.pdf (Refer to the NW Firmware Update Tool OI on the CD)
Setup:
\xFirmware\Tools\NwFirmup\Setup\Setup.exe
2) Preparing the Firmware Code
Double click the appropriate Destination Shortcut Batch File and copy the Firmware Code File on the
CD-ROM to the Firmware Data Folder in your PC. Note that the files in the Archive will be extracted
automatically into the designated folder when the Archived file (.exe) is Double-clicked.
Example:
From:
Destination Shortcut Batch File: D:(CD-ROM Drive) \ xFirmware \ USA.bat
Firmware Code File:
To:
Firmware Data Folder:
3) Preparing the Main Unit for the Firmware Upgrade
Make sure the unit's Key Operator Password is the same as the tool's password.
Make sure the unit is in an idle state (e.g. not making copies, not printing, etc.).
4) Upgrading the Main Unit's Firmware Code
Start the Network Firmware Update Tool and select the following Firmware Code Folders in the
C:\Program Files\Panasonic\Panasonic-FUP\Data folder, and then follow the display instructions to
upgrade the Main Unit's Firmware Codes.
Parent Firmware File Folder
\ UF-9000_AU_xxxxxxxx
\ DP-190_180_xx_xxxxxxxx
Ver. 2.0
UF-9000_AU_xxxxxxxx.exe or DP-190_180_xx_xxxxxxxx.exe
C:\ Panasonic \ Panasonic-FUP \ Data
Sub Firmware File Folder
\ SC_STD \ DX-TriAxVxxxxx_xx
\ SC_PCL \ DX-TriBxVxxxxx_xx
\ SC_PS \ DX-TriDxVxxxxx_xx
\ SPC \ DX-TRI-SAAVxxxxx
\ SC_STD \ DP-TriAxVxxxxx_xx
\ SC_PCL \ DP-TriBxVxxxxx_xx
\ SC_PS \ DP-TriDxVxxxxx_xx
\ SPC \ DX-Tri-SAAVxxxxx
When you select the Parent Folder, the following
Firmware Type window appears. Proper Sub File Folders
are selected automatically by selecting the Firmware
Type.
The transferring order is set up automatically.
35
UF-9000
DP-180/190
Transferring Order
1
1
1
2
1
1
1
2
JUN 2004
Advertisement
Table of Contents
