Page 2
This label is located on the bottom of the chassis. “ATRAC”, “ATRAC AD”, SonicStage and their logos are trademarks of Sony Corporation. “WALKMAN” and “WALKMAN” logo are registered trademarks of Sony Corporation. Microsoft, Windows Media,...
(analog connection). – CD/MD changers: CD/MD changers can be connected to the SONY BUS at the rear of the unit. * A CD TEXT disc is a CD-DA that includes information such as disc, artist and track name.
Setting the clock Attaching the front panel Engage part A of the front panel with part B of The clock uses a 12-hour digital indication. the unit, as illustrated, and push the left side into position until it clicks. Press and hold the select button. The setup display appears.
SOURCE SEEK SEEK MODE GP/ALBM SHUF PAUSE DSPL SCRL CDX-GT460US qfqg CDX-GT460U Card remote commander Refer to the pages listed for details. The corresponding buttons on the card remote RM-X151 commander control the same functions as those on the unit.
K SEEK –/+ buttons The following buttons on the card remote commander have also different buttons/functions CD/MD* /USB* from the unit. Remove the insulation film before To skip tracks (press); skip tracks use (page 4). continuously (press, then press again within about 1 second and hold);...
Radio For details on selecting a CD/MD changer, see Storing and receiving stations page 12. Caution Display items When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM Press (SOURCE) repeatedly until “TUNER”...
USB devices Tuning automatically Select the band, then press (SEEK) –/+ to search for the station. Playback USB devices Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. If you know the frequency of the station you want to listen to, press and hold (SEEK) –/+ to locate the approximate frequency, then press (SEEK) –/+ repeatedly to fine adjust to the desired frequency...
Other functions Listening to music on a Mass Storage Class type audio device Changing the sound settings Repeat and shuffle play 1 During playback, press (3) (REP) or (4) Adjusting the sound (SHUF) repeatedly until the desired setting characteristics — BAL/FAD/SUB appears.
With the card remote commander DIM (Dimmer) In step 3, to adjust the selected item, press <, M, , To change the brightness of the display. or m. – “DIM-ON”: to dim the display. – “DIM-OFF” ( ): to deactivate the dimmer. Adjusting setup items —...
Using optional equipment CD/MD changer Selecting the changer Auxiliary audio equipment 1 Press (SOURCE) repeatedly until “CD” or By connecting an optional portable audio device “MD” appears. to the AUX input jack (stereo mini jack) on the 2 Press (MODE) repeatedly until the desired unit and then simply selecting the source, you changer appears.
• Before playing, clean the discs Additional Information with a commercially available cleaning cloth. Wipe each disc Precautions from the center out. Do not use solvents such as benzine, thinner, commercially available • If your car has been parked in direct sunlight, cleaners, or antistatic spray allow the unit to cool off before operating it.
• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to function. For details on the compatibility of your MP3 only. ID3 tag is 15/30 characters (1.0 and USB device, visit the Sony support website 1.1), or 63/126 characters (2.2, 2.3 and 2.4). (page 19).
• The characters for a folder/file name and text malfunction. In such a case, information written by SonicStage are displayed. Fuse (10A) consult your nearest Sony For details on ATRAC CD and ATRAC Audio dealer. Device, see the SonicStage manual.
Removing the unit Specifications Remove the protection collar. CD Player section Signal-to-noise ratio: 120 dB 1 Detach the front panel (page 5). Frequency response: 10 – 20,000 Hz 2 Engage the release keys together with the Wow and flutter: Below measurable limit protection collar.
Card remote commander: RM-X151 No beep sound. Parts for installation and connections (1 set) • The beep sound is canceled (page 11). Optional accessories/equipment: • An optional power amplifier is connected and you are BUS cable (supplied with an RCA pin cord): not using the built-in amplifier.
MP3/WMA/AAC files take longer to play back USB playback than others. You cannot play back items via a USB HUB. The following discs/devices take a longer time to start This unit cannot recognize USB devices via a USB playback. HUB, and is not compatible with a device that has a –...
Page 19
If these solutions do not help improve the situation, NO MAG consult your nearest Sony dealer. The disc magazine is not inserted in the CD changer. If you take the unit to be repaired because of CD t Insert the magazine in the changer.
Page 20
“ATRAC”, “ATRAC AD”, SonicStage y sus respectivos logotipos son marcas comerciales de Sony Corporation. “WALKMAN” y el logotipo de “WALKMAN” son marcas comerciales registradas de Sony Corporation. Microsoft, Windows Media y el logotipo de Windows son marcas comerciales o...
Page 21
Tabla de contenido Otras funciones Bienvenido......4 Cambio de los ajustes de sonido ... 11 Procedimientos iniciales Ajuste de las características del sonido —...
– Cambiadores de CD/MD: los cambiadores de CD/MD pueden conectarse al BUS de Sony en la parte posterior de la unidad. * Un disco CD TEXT es un CD-DA que incluye información como el nombre del disco, del artista y...
Notas Ajuste del reloj • No deje caer ni ejerza excesiva presión sobre el panel frontal y el visualizador. • No someta el panel frontal al calor, a temperaturas El reloj emplea una indicación digital de altas ni a excesiva humedad. Evite dejarlo en un 12 horas.
SEEK SEEK MODE GP/ALBM SHUF PAUSE DSPL SCRL CDX-GT460US qfqg CDX-GT460U Control remoto de tarjeta Consulte las páginas indicadas para obtener información detallada. Los botones RM-X151 correspondientes en el control remoto de tarjeta controlan las mismas funciones que los de la unidad.
Page 25
K Botones SEEK –/+ Los botones siguientes del control remoto de tarjeta también presentan botones y funciones CD/MD* /USB* distintos de los de la unidad. Retire la película de Para saltar pistas (presionar); para saltar aislamiento antes de usar la unidad (página 4). pistas en forma continua (presionar y volver a presionar antes de que transcurra 1 segundo w;...
Radio Para obtener más detalles sobre cómo seleccionar Almacenamiento y recepción un cambiador de CD/MD, consulte la página 13. de emisoras Elementos de la pantalla Precaución Para sintonizar emisoras mientras maneja, utilice la función Memoria de la mejor sintonía (BTM) para evitar accidentes.
Dispositivos USB Sintonización automática Seleccione la banda y, a continuación, presione (SEEK) –/+ para buscar la Reproducción mediante emisora. dispositivos USB La búsqueda se detiene cuando la unidad recibe una emisora. Repita este procedimiento hasta recibir la emisora deseada. Sugerencia Si conoce la frecuencia de la emisora que desea escuchar, mantenga presionado (SEEK) –/+ para localizar la frecuencia aproximada y, a continuación,...
Reproducción repetida y aleatoria Audición en un dispositivo de 1 Durante la reproducción, presione (3) (REP) audio de almacenamiento masivo o (4) (SHUF) varias veces hasta que aparezca el ajuste deseado. Reproducción repetida y aleatoria Seleccione Para reproducir 1 Durante la reproducción, presione (3) (REP) o (4) (SHUF) varias veces hasta que aparezca TRACK pistas en forma repetida.
Para restaurar la curva de ecualizador ajustada Otras funciones en fábrica, mantenga presionado el botón de selección antes de que finalice el ajuste. Cambio de los ajustes de Después de 3 segundos, se completa el ajuste y la pantalla vuelve al modo de reproducción/ sonido recepción normal.
SUB/REAR* Uso de equipo opcional Para cambiar la salida de audio. – “SUB-OUT” ( ): para que la salida se realice a través de un altavoz potenciador de graves. Equipo de audio auxiliar – “REAR-OUT”: para que la salida se realice a Si conecta un dispositivo de audio portátil través de un amplificador de potencia.
Información complementaria Cambiador de CD/MD Precauciones Selección del cambiador 1 Presione (SOURCE) varias veces hasta que • Si estaciona el automóvil bajo la luz directa del aparezca “CD” o “MD”. sol, deje que la unidad se enfríe antes de usarla. 2 Presione (MODE) varias veces hasta que •...
USB, visite el sitio • La unidad es compatible con la norma ISO 9660 Web de soporte técnico de Sony (página 20). de formato de nivel 1/nivel 2, con la norma Joliet/ • El códec correspondiente difiere en función del Romeo en cuanto al formato de expansión y con...
No es posible reproducir los archivos WMA que se manual, póngase en contacto con el distribuidor indican a continuación. Sony más cercano. – archivos con formato de compresión sin pérdida – archivos protegidos por derechos de autor...
Fusible (10 A) Extraiga la unidad. de funcionamiento interno. En tal caso, consulte con el 1 Inserte las dos llaves de liberación distribuidor Sony más cercano. simultáneamente hasta escuchar un clic. El gancho debe mirar hacia adentro.
Generales 2 Tire de las llaves de liberación para extraer la unidad. Salida: Terminal de salidas de audio (intercambiable entre posterior y sub) Terminal de control del relé de la antena motorizada Terminal de control del amplificador de potencia Entradas: Terminal de entrada de control BUS Terminal de entrada de audio BUS 3 Deslice la unidad para extraerla del marco.
No es posible utilizar el control remoto de Solución de problemas tarjeta. • Si la función de desactivación de la pantalla está La siguiente lista de comprobación le ayudará a activada (la pantalla no está iluminada), no es posible solucionar los problemas que puedan producirse con operar la unidad mediante el control remoto de tarjeta la unidad.
Recepción de radio El sonido es discontinuo. Es posible que la discontinuidad del sonido sea de una No es posible recibir las emisoras. tasa alta de bits de más de 320 kbps. Hay ruidos que obstaculizan el sonido. • Conecte un cable de control de la antena motorizada (azul) o un cable de fuente de alimentación auxiliar Mensajes/indicaciones de error (rojo) al cable de suministro de alimentación del...
Page 38
Si estas soluciones no ayudan a mejorar la situación, NO MUSIC póngase en contacto con el distribuidor Sony más El disco o dispositivo USB no contiene ningún archivo cercano. de música. Si entrega la unidad para su reparación a causa de t Inserte un CD de música en esta unidad o en un...
曲目中未写入光盘 / 专辑 / 群组 / 曲目名称。 在播放过程中,USB 设备连接断开。 NOT READ t 断开 USB 设备连接之前必须先停止播放, 以保护 本机未读取光盘信息。 数据。 t 装入光盘,然后在列表中选择此光盘。 声音断断续续。 NOTREADY 当比特率超过 320 kbps 时,声音可能断断续续。 MD 换碟机的盖子被打开或没有正确插入 MD。 t 关上盖子或正确插入 MD。 OFFSET 可能发生内部故障。 t 检查连接。如果此出错指示仍然显示在显示屏 中,请向您附近的 Sony 经销商咨询。 续下页 t...
Page 56
请连接 Mass Storage Class 的 USB 设备 (第 13 页) 。 “ ”或 “ ” 后退或快进过程中,您已到达光盘的开头或结尾, 无法再继续向前。 “ ” 本机无法显示此字符。 *1 如果CD 或 MD播放出现错误, 则 CD或 MD的光盘号不显 示在显示屏上。 *2 造成错误的光盘号出现在显示屏上。 如果这些解答仍无法助您改善情况,请向您附近 的 Sony 经销商咨询。 如果因为 CD 播放故障而将本机送修,请带好出 现问题时所使用的光盘。 支持网站 如果您有关于本产品的任何疑问或需要最 新的支持信息,请访问以下网站: 拉丁美洲用户: http://esupport.sony.com/ES/LA/ 泛亚用户: http://www.css.ap.sony.com/ http://www.sony-asia.com/caraudio/...
Page 60
Support site If you have any questions or for the latest support information on this product, please visit the web site below: Customers in Latin America: http://esupport.sony.com/ES/LA/ Customers in Asia and Oceania: http://www.css.ap.com/caraudio/ http://www.sony-asia.com/caraudio/ http://www.sony.net/ Sony Corporation Printed in Thailand...