Routing Table Commands - D-Link DES-1228/ME Reference Manual
Layer 2 managed ethernet switch
Hide thumbs
Also See for DES-1228/ME:
- User manual (267 pages) ,
- Reference manual (306 pages) ,
- Hardware installation manual (53 pages)
Table of Contents
Advertisement
The Routing Table commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
create iproute
delete iproute
show iproute
create ipv6route
delete ipv6route
show ipv6route
Each command is listed, in detail, in the following sections.
create iproute
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add the default static address 10.48.74.121, with a metric setting of 1, to the routing table:
DES-1228/ME:5#create iproute default 10.48.74.121 1
Command: create iproute default 10.48.74.121 1
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
[default] <ipaddr> {<metric 1-65535>}
[default]
{<network_address> | static}
[default] [<ipif_name 12> <ipv6addr> |<ipv6addr>] {<metric
1-65535>}
[[default] [<ipif_name 12> <ipv6addr> |<ipv6addr>] | all]
Used to create IP route entries to the Switch's IP routing table.
create iproute [default] <ipaddr> {<metric 1-65535>}
This command is used to create a default static IP route entry to the
Switch's IP routing table.
<ipaddr> − The gateway IP address for the next hop router.
<metric 1-65535> − Allows the entry of a routing protocol metric
entry representing the number of routers between the Switch and
the IP address above. The default setting is 1.
Only Administrator level, Operator level or Power User level users
can issue this command.
R
OUTING
245
28
T
C
ABLE
OMMANDS
- Quick Links:
- Using the Console Cli
Hide quick links:
Advertisement
Table of Contents
