Item
Restores clips that have been damaged by sudden power outages
during recording or by other causes and are marked by the bad clip
indicator (yellow
REPAIR CLIP
NOTE:
• Some clips are so badly damaged they cannot be repaired.
Bad clips that are beyond repair are indicated by a red
indicator (
Use the RECONNECTION function to rejoin continuous clips that
span across multiple P2 cards but are not recognized as
continuous clips and are indicated by the incomplete clip indicator
(
).
NOTE:
Incomplete clips occur under the following conditions.
• When the individual clip segments on each P2 card that make
up the clip are copied separately.
RE-
• When the segments of a continuous clip that are recorded on
CONNECTION
multiple cards are separately copied to a storage device and
then copied back to a P2 card.
• When a DVCPRO HD or AVC Intra100 clip that is 5 minutes or
longer (10 minutes or longer for a DVCPRO50 or AVC Intra50
clip, and 20 minutes or longer for a DVCPRO/DV clip) is copied
to a storage device and later written back to a P2 card.
• When some but not all the clip segments in a clip that consists
of three or more clip segments are reconnected, the
incomplete clip mark (
Copies selected clips to a P2 card in a P2 card slot or to a storage
device.
NOTE:
COPY
• Take care not to turn off the power or remove/insert a card
during copying. Otherwise the copied clip may become bad. If
the copied clip goes bad, delete it and make a new copy.
• Reconnect incomplete clips before copying.
Replaces a clip thumbnail with images to which text memos have
been attached. This function is available when a text memo clip is
EXCH.THUMB
displayed.
NAIL
Sets and changes the names of storage partitions.
NOTE:
CHANGE
• Displayed only when storage EXPLORE is open.
PARTITION
• The date when the partition was created is the default partition
NAME
name.
• Enabled only for TYPE S storage devices.
Deletes the last partition on a storage device.
NOTE:
DELETE LAST
• Deletion is enabled only when the cursor is in the last partition.
PARTITION
• Displayed only when storage EXPLORE is open.
52
Setup Menu: Menu items
Settings and brief function description
).
).
) will remain.
SYSTEM FREQ
indications
(Main)
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
Mode
2D
SYNC
3D
PB
M
M
M
M
M
M
M
M