Starting Up/Shutting Down - Panasonic CF-17 Operating Instructions Manual
Hide thumbs
Also See for CF-17:
- Reference manual (56 pages) ,
- Supplementary instructions manual (17 pages) ,
- Supplementary instructions (4 pages)
Table of Contents
Advertisement
Starting Up/Shutting Down
Starting Up
Latch
2
1
Power
Indicator
Power Switch
1
Open the display
1
Lift up the latch.
Lift open the display.
2
2
Turn your computer on
Slide the power switch as shown and hold it for approximately one second until
the power indicator turns on before releasing it.
CAUTION
The computer will not power on when the display is closed (except when
[Panel Switch] has been set to [LCD Off] in the Setup Utility
"Setup Utility").
After confirming that the power indicator has turned on, avoid the follow-
ing until Windows has completed loading.
• Touching the power switch.
• Performing any keyboard, touch pad, touchscreen (or external mouse)
operations.
• Closing the display.
If the display is closed while Windows is starting up, it is possible that color,
etc., will not be displayed properly. Run the [MS-DOS Prompt] ([Start] -
[Programs] - [MS-DOS Prompt]), and use full screen display mode by press-
ing Alt + Enter .
After returning from the full screen mode
display will be shown correctly.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
When the CPU temperature rises, the computer may not power on to prevent the
CPU from overheating. Should this happen, allow the computer to cool down then
switch the power on again.
If the computer still does not power on, please contact Panasonic Technical Support.
If security indicator (
you must first enter your password. (
Upon entering your
password and press-
ing Enter .
*
If you are starting from the suspend or hibernation mode (
"Suspend/Hibernation Functions"), if after three attempts the correct pass-
word is not input, or if no password is entered for about a minute, the com-
puter returns to the suspend or hibernation mode.
When an application or file that was previously displayed
appears on your screen,
the suspend or hibernation function has been set. (
Functions")
) is displayed,
"Security Measures")
If the correct password is input,
Over three incorrect attempts,
or no password is entered for about a minute,
Alt +
Enter again, the
Will Start
Will Not Start*
(Power off)
"Suspend/Hibernation
15
- Quick Links:
- Reference Manual
- Specifications
Hide quick links:
Advertisement
Table of Contents
