Table of Contents
Advertisement
3-C Private Talk
If you want to talk privately during transmission, open the flip. The
unit enters the private talk mode. You can transmit by holding the
unit near your ear like a telephone handset.
1 Open the flip and check the current channel activity (3-A).
" is displayed.
≥"
≥Do not talk if someone is already on the channel.
dicator
(TALK)
2 Press and hold
microphone.
≥The TALK/BUSY indicator lights red.
3 To receive, release
when
≥You can hear the other party's voice through the ear speaker.
monitor
≥The TALK/BUSY indicator lights green.
ission.
4 When finished, close the flip.
" will disappear.
≥"
≥ To maximize readability of your transmitted signal, pause a few
seconds after pressing (TALK) and speak.
To select the ear speaker volume
The factory preset is "2".
1 Open the flip and press
≥" VOL " and the current volume level will flash on the display.
(›)
(‹)
2 Press
or
(1–3) is displayed.
3 When finished, close the flip.
while
the
ay.
level
to transmit and talk into the
(TALK)
.
(›)
(‹)
or
.
repeatedly until the desired volume level
¤
To Communicate
3-D Call Tones
The unit has five different call tones to identify each user and alert
others that you intend to transmit. When you press (CALL), the
other party will be alerted with your call tones.
To send call tones
(CALL)
1 Press
.
≥The TALK/BUSY indicator lights red.
≥" CALL " is displayed and the call tones sound.
≥The other party will be alerted with the call tones.
≥ The call tones will sound continuously if you press and hold
(CALL) .
≥ If you want to send the call tones privately, open the flip before
pressing (CALL) .
To change the call tones
The factory preset is "1".
(MENU)
1 Press
four times.
≥" CALL " and the current setting will flash
on the display.
(›)
(‹)
2 Press
or
desired setting (1–5) is displayed.
≥Each time you press the button, the
selected call tones will sound.
3 When finished, press
3-E Vibratory Call
KX-TR325 allows you to receive a vibratory call instead of a
message or call tones (—"Vibe Ringer"). This is useful in noisy
locations, or when quiet is required. The factory preset is OFF.
To turn on/off the vibratory call mode
(MENU)
1 Press
five times.
≥" VIB " and the current setting will flash on
the display.
(›)
(‹)
2 Press
or
vibratory call mode.
3 When finished, press
10 seconds.
≥When set to ON, " VIB " will remain on the display.
When you receive a vibratory call
The unit vibrates while the other party is sending a message or call
tones.
—To hear the other party, press (MONITOR).
—To transmit, press and hold (TALK) or open the flip, and talk into
the microphone.
The vibratory call mode is temporarily turned off during transmission.
30 seconds after transmission is complete, the unit will return to the
vibratory call mode.
≥ The vibratory call mode is turned off while the flip is opened. When
you close the flip, the unit will return to the vibratory call mode.
Section 3
repeatedly until the
(TALK)
or wait for 10 seconds.
(KX-TR325 only)
to turn on/off the
(TALK)
or wait for
Advertisement
Table of Contents
