Other Connections; Connecting To The Remote Control Jacks; Connecting The Power Cable - Yamaha BD-S677 Owner's Manual
Hide thumbs
Also See for BD-S677:
- Owner's manual (67 pages) ,
- Owner's manual (344 pages) ,
- Service manual (50 pages)
Table of Contents
Advertisement
■ Connecting to the REMOTE
CONTROL jacks
– You can transmit and receive the remote control
signals by connecting to the REMOTE CONTROL
(OUT/IN) jacks.
– Firmly connect monaural 3.5 mm mini plug cables
(commercially available) to the REMOTE
CONTROL (OUT/IN) jacks.
– If your AV receiver is a Yamaha product and has the
capability to transmit SCENE control signals from
the REMOTE OUT jack, you can control the Player
with the SCENE function.
Caution!
Do not connect the power cable of this
Player until all connections are completed.
This Player
NETWORK
OUT
REMOTE CONTROL
USB
To REMOTE
CONTROL
(OUT) jack
Monaural 3.5 mm
mini plug cable
To remote
control in
jack
REMOTE CONTROL IN
Yamaha component
Other connections
IN
To REMOTE
CONTROL (IN)
jack
Monaural 3.5 mm mini
plug cable
To remote
control out
jack
REMOTE CONTROL OUT
Infrared signal receiver
or Yamaha component
(such as AV receiver)
Hints
– For details about the SCENE function, refer to the
owner's manual supplied with your Yamaha AV
receiver.
– You can connect a Yamaha component (such as CD
player) supports the SCENE function to the
REMOTE CONTROL (OUT) jack of this Player.
■ Connecting the power cable
– After all connections are completed, plug the
supplied power cable into the AC IN on the rear of
the Player. Then plug into AC outlet.
To AC outlet
2
AC IN
17
En
Advertisement
Chapters
Table of Contents
