Table of Contents
Advertisement
Cleaning and care
Automatic rinse
Preparing for the rinsing process
40
The automatic rinse function clears the steam generator of
mineral deposits from the evaporated water.
After a water throughput of approx. 3 litres, the water from the
steam generator is drained off into the residual water
container when the Fashion Master is next switched on.
The rinsing process lasts for a couple of minutes.
During the rinsing process the indicator lights do not light
up when the steam ironing system is switched on, the iron
does not heat up and no steam is produced.
Water is drained off into the residual water container.
Steam will escape and trickling noises can be heard
during this process.
The steam ironing system can only be used again when
the automatic rinsing process is completed.
^ Set the appliance to its highest working position (see
"Adjusting the height") to allow access for removing the
residual water container.
^ If the k indicator light comes on when the appliance is
switched on, fill the water container (see "Filling the water
container").
^ If the 2 indicator light comes on when the appliance is
switched on, empty and replace the residual water
container.
Hide quick links:
Advertisement
Table of Contents
