Toshiba e-STUDIO170F Owner's Manual page 65
Toshiba e-studio170f multifunction fax owner's manual
Hide thumbs
Also See for e-STUDIO170F:
- Operation manual (244 pages) ,
- Quick start manual (34 pages) ,
- Service manual (492 pages)
Table of Contents
Advertisement
Reception Mode Default Setting - continued
3
4
Enter the FAX Ring
Delay
Enter the desired number of
Enter the desired Fax Monitor
rings (1 to 10) before the fac-
Time (00 to 99 seconds). Dur-
simile will answer the incoming
ing this period, the facsimile
call in Auto Receive mode.
will monitor for the automatic
fax CNG signal. If detected,
the unit will switch to fax re-
ception when set for FAX/TAD
mode.
When the desired ring count is
displayed on the LCD, press:
When the desired Fax monitor
time is displayed on the LCD,
press:
COMPLETED
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
Go to Step 6.
Returns to display the SETUP
menu screen.
Go to Step 6.
5
Enter the FAX
Monitor Time
Enter the desired number of
pseudo rings (1 to 15) before
switching to facsimile reception
in TEL/FAX mode.
When the desired ring count is
displayed on the LCD, press:
COMPLETED
Displayed for 2 seconds
COMPLETED
Returns to display the SETUP
Displayed for 2 seconds
menu screen.
Go to Step 6.
6
Enter the Pseudo
Select Another
SETUP Item, or ...
Ring Delay
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
STOP
6 3
Advertisement
Table of Contents
