Table of Contents
Advertisement
Laser Settings
This screen allows you to view and change the settings in relation
to the way the laser rangefinder functions.
The Laser Mode options controls the selection between always on
(Streaming) or single target (One Shot) mode.
The 'Streaming' option is the default setting for where the laser
•
is continually firing and providing a live range distance to
target. This option is enabled by default.
The 'One Shot' option causes the laser rangefinder to attempt
•
to determine a distance only when the 'Capture' button is press.
Where 'One Shot' Laser Mode has been selected, the capture
preview Distance value will be shown as 'Single'.
WARNING!
selected the laser rangefinder emits a pulse that may
cause infrared transmission detectors (e.g. speed
camera detectors) to be activated.
The Measurement Units option controls the selection between
recording distance measurement units.
'Feet' option displays measured distance in feet and inches and
•
records in decimal feet (e.g. displayed 4'6" will record as 4.5).
This option is enabled by default.
'Meters' option displays and records measured distance in
•
decimal meters.
The capture preview and review screens will present the measured
range in the 'Distance' panel
MapSight
U ser
M anual
MS-101-14-12-34.0
Regardless of which the Laser Mode is
Page
3 1
www.gemapsight.com/support
- Quick Links:
- Mapsight Software and Licensing
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
