Troubleshooting - Hitachi PV-XA100 Instruction Manual

Cordless stick cleaner
Table of Contents

Advertisement

Troubleshooting

Problem
The LED lights do
not turn on or are
dim.
There is a clattering sound
coming from the power head.
There is an
abnormal sound
coming from around
the dust case.
The indicator lamp
does not light up in
red even when the
stick cleaner is set
on the charging
station.
The indicator lamp
alternately flashes in red and
green when the stick cleaner
is set on the charging station.
The indicator lamp
flashes in red when the
stick cleaner is set on
the charging station.
If the problem persists
When disposing of the product
This product uses a nickel-metal hydride battery. Nickel-metal hydride batteries are a valuable,
recyclable resource.
l The battery is built into the handy cleaner handle.
l The battery is a consumable. If the operating time is particularly short even after fully charged, there is a problem
with the battery life. Replace the battery.
E-22
Things to check
Is the remaining battery level low?
Is the handy cleaner control button
pressed?
The safety switch is designed to produce the sound, which is normal.
Are the clean filter and dust case
securely attached?
Is the cyclone chamber lid firmly
closed?
Is the plug of the charging station firmly
inserted into the socket?
Is the stick cleaner securely set on
the charging station?
Is the handy cleaner securely
attached to the stick cleaner?
Is the battery fully charged?
Are the metal contacts of the charging
station or stick cleaner dirty?
Does the cleaner not operate or is
operating time short?
The handy cleaner is malfunctioning. Detach it from the charging station and
consult with the Hitachi authorized service agent.
For matters concerning the disposal of used products, we request that you
inquire at your local governing policy and cooperate with recycling regulations.
*Recycling rules may vary depending on the local governing policy.
Countermeasure
Set the cleaner on the charging station for charging.
Press the stick cleaner control button.
Securely attach it.
Firmly close it.
Firmly insert the plug.
Securely set it.
Securely attach it.
When fully charged, the indicator
lamp turns off.
Remove any dirt on the contacts with
a dry cloth.
The battery is exhausted. Please
consult with the Hitachi authorized
service agent.
Do not attempt to repair it yourself.
Please consult with the dealer.
Page
P.E-8
P.E-9
-
P.E-13
P.E-16
P.E-17
P.E-8
P.E-8
P.E-14
P.E-8
-
-
-
-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents