Toshiba e-STUDIO163 Service Handbook page 124
Hide thumbs
Also See for e-STUDIO163:
- Service manual (236 pages) ,
- Service handbook (235 pages) ,
- Operator's manual (162 pages)
Advertisement
(3)
Close the ADF and check if the positioning
pins fit the holes on the ADF.
[B] Adjustment
If the pins cannot be fitted into the holes, perform the adjustment according to the following procedure.
(1)
Remove the right-hand hinge screw at the
rear side.
(2)
Loosen the left-hand hinge screw at the rear
side.
e-STUDIO163/203 ADJUSTMENT
3 - 46
Fig. 3-39
Fig. 3-40
Fig. 3-41
© December 2005 TOSHIBA TEC
Advertisement
Troubleshooting
