Miele Built-in coffee machine Operating And Installation Instructions page 68
Built-in coffee machine
Hide thumbs
Also See for Built-in coffee machine:
- Operating and installation instructions (100 pages) ,
- Operating and installation instructions (84 pages)
Table of Contents
Advertisement
Problem solving guide
Unsatisfactory results
Problem
There are coffee
grounds in the
cup.
The coffee is not
hot enough.
The coffee is
diluted.
The preparation
time and colour of
the coffee vary.
There is coffee
water in the waste
container.
The heating-up
time is getting
longer, the amount
of water being
dispensed is
incorrect and the
coffee machine is
not performing
properly.
68
Possible cause and remedy
The capsule plate is dirty.
^ Clean the capsule plate (see "Cleaning and care").
The cup has not been preheated.
Preheat the cup, e.g. with hot water.
The smaller the cup is, and the thicker its sides, the more
important it is to preheat it.
Too much water was programmed in for the type of capsule
used.
^ Change the portion size (see "Changing the portion size").
Depending on the type of capsule and the selected type of
drink (espresso, coffee, coffee long), the preparation time,
the colour and the taste of the coffee may vary.
This is not a fault.
^ Follow the recommendations for each type of capsule (see
instructions on packaging).
The water is left over from the brewing and rinsing process.
This is not a fault.
The coffee machine needs descaling.
^ Descale the coffee machine (see "Descaling").
Hide quick links:
Advertisement
Table of Contents
