Procedure
The basic steps are shown below.
1.
Entering the programming mode
PROGRAM
Press PROGRAM.
2.
Programming
programme no.
Enter programme
number (3 digits).
•
To delete or change an entry, press CLEAR (TRANSFER).
•
To confirm your entry after storing data:
— The STORE button light: Lights red.
— Confirmation Tone:
One beep: Your entry is accepted.
Three beeps: Your entry is rejected.
•
To exit the programming mode, press the PROGRAM button.
Customising Your Phone & System
user password
Dial
.
Enter user password.
SKP +
Press SKP+.
your entry
NEXT
Press NEXT.
Enter your entry
4.3 Customising Your System (User Programming)
SKP –
OR
To continue programming
Press SKP-.
STORE
Press STORE.
To continue entering selections
NEXT
PREV
OR
Press NEXT.
Press PREV.
SELECT
Press SELECT.
To go to the next/previous programme or entry.
To enter the desired programme or entry.
To end
END
Press END.
229