Table of Contents
Advertisement
RDS Setup Function
RDS Setup Screen
A
B
A
RDS (Radio Data System)
RDS is a digital information system that lets
you receive signals besides those of regular
radio programmes, such as network
information being transmitted from radio
stations.
When listening to an RDS station (ie, a station
with RDS capability), the programme service
name of the station is displayed along with the
frequency, advising you quickly which station
is being received.
RDS (Radio Data System) stations also
transmit frequency data for the same station.
When you are making long trips, this function
automatically switches to the particular
frequency with the best reception for the
particular network of stations that you want to
listen to. The data is automatically stored,
allowing you to switch quickly to another RDS
stations, broadcasting the same programme,
that has better reception. These include
stations stored in the station preset memory
that you often listen to.
Enhanced Other Network
Stations that offer <Enhanced Other Network>
also transmit information about other RDS
stations that have traffic information. When
you are tuned to a station that is not
transmitting traffic information, but another
RDS station starts transmitting a traffic
bulletin, the tuner automatically switches to
the other station for the duration of the
bulletin.
Alarm
When an emergency transmission
(announcing disasters, etc.) is sent, all current
functions are interrupted to allow the warning
to be received.
A
News Bulletin Function with PTY News
Timeout Setting
You can arrange to have news bulletins
interrupt your current listening source,
including other radio stations. When the News
Bulletin function is on, the PTY News Timeout
setting allows you to set the interval during
which further news interruption cannot take
place. You can adjust the PTY news
interruption period from 10 to 90 minutes for
each journey.
14
C
D
E
Changing the Function Setting:
Touch [ 2 ] or [ 3 ] repeatedly until the desired
setting is displayed.
Touch [ 3 ] to increase the interval, and the [ 2 ]
to decrease it.
OFF
00min
10min
40min
50min
60min
90min
(min= minutes)
When you select the news interruption timeout
interval, the News function turns on and the
NEWS indicator is displayed.
NOTE
• If you choose the " 20min " setting, further
news bulletins will not be received for 20
minutes once the first news bulletin is received.
Setting the interval at the "OFF" factory default
indicates no News Timeout will be made,
meaning that additional news bulletins will
continue to be searched for.
•This function is only available if the desired
station sends PTY-code for news bulletin or
belongs to <Enhanced Other Network> sending
PTY-code for news bulletin.
B
Alternative Frequency Function On/Off
When poor reception is experienced,
automatically switch to another frequency
broadcasting the same programme in the same
RDS network with better reception.
The AF indicator is displayed when the AF
function is turned on.
Each time you touch [ AF ], the mode switches as
follows:
" ON "
AF function is turned on
" OFF "
AF function is turned off
NOTE
When no other stations with stronger reception
are available for the same programme in the RDS
network, you may hear the incoming broadcast in
bits and snatches. Turn off the AF function in
such a case.
20min
30min
70min
80min
- Quick Links:
- Accessories
- Installation
Hide quick links:
Advertisement
Table of Contents
