Table of Contents
Advertisement
2. How to set to each mode
Every time the DISPLAY (forward) or EDIT (reverse) button is pressed, the mode changes. (For operation of each
mode, refer to the section describing each mode.)
Since this mode is not required for servic-
ing , proceed to another mode promptly.
Panel keys used in TEST mode
Panel key
Function
REC
TEST mode end (entry of EEPROM)
EJECT
Eject
DISPLAY
Menu feeding in TEST mode (1) / (Feeding of menus mainly related to adjustment and EEPROM)
TITLE
Menu feeding in TEST mode (2) / (Feeding of menus mainly related to continuous playback and continuous recording)
CHARA.
Menu feeding in TEST mode (3) (Feeding of menus mainly related to INNER mode and JUMP SELECT)
EDIT
Menu feeding in reverse in TEST mode (Menu feeding in reverse in each TEST mode)
SET/ENTER
Finalization of menu selection or starting of its execution
DELETE/CANCEL
Stopping each test item and shifting to menu selection at one step upper level
SEARCH w
Forced feeding of the slide (in FWD direction) / Execution of JUMP function (FWD)
ADDRESS setting value increased / Specification of direction when setting the tracking
SEARCH e
Forced feeding of the slide (in REV direction) / Execution of JUMP function (REV)
ADDRESS setting value reduced / Specification of direction when setting the tracking
JOG DIAL y
Forced feeding of the disc to EJECT / setting value increased
JOG DIAL t
Forced feeding of the disc to LOAD / setting value reduced
INPUT
Switching of laser power at EJECT / switching of display for continuous playback / switching of digit setting when setting ADDRESS
RANDOM
–
REPEAT S/F
–
REPEAT A-B
–
SCROLL
–
PLAY/PAUSE
–
STOP
–
3. How to cancel test mode
1) Be sure to perform AUTO preliminary adjustment, AUTO adjustment and AUTO AFB adjustment.
( "COMPLETE" appears on the display)
2) After completing above ajustments, press the REC button. (Entry to EEPROM initiates then.)
The TEST mode is completed. ( "Test End" appears on the display)
3) Press the EJECT button to take out the disc.
4) Turn off the power.
AUTO_AJST (AUTO adjustment)
AUT_AFB (AUTO AFB adjustment)
RST_YOBI (RESULT preparation)
MNU_YOBI (MANUAL preliminary adjustment)
MNU_AJST (MANUAL adjustment)
EEPROM_SET (EEPROM setting)
AUT_YOBI (AUTO preliminary adjustment)
(Entry of EEPROM adjustment value)
@
@
@
RESULT (RESULT)
@
@
@
@
@
MDX-596
*
Command code
1F
H
B3
H
B2
H
B4
H
F2
H
A8
H
A2
H
A7
H
AA
H
AC
H
F3
H
F4
H
F5
H
8
- Quick Links:
- Adjustment & Test Mode
- Parts List
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
