Yamaha RAV-2000 Quick Start Manual

Intelligent touch panel remote control

Hide thumbs Also See for RAV-2000:

Download this manual

Enlarged version

RAV-2000

Intelligent Touch Panel

Remote Control

Quick-Start Guide

RAV-2000 Quick-Start Guide

NSTALLING

ATTERIES

1. Locate the battery door on the RAV-2000's back and slide it off.

2. Use the indicators to match and insert the four (4) AA

batteries (included).

3. Slide the battery door back on.

After a short time, the RAV-2000 will start up automatically and

beep twice to indicate it is ready to use.

NOTE: To adjust the contrast, use the Contrast Dial on the left side

of the unit.

Page 1: Remote Control
RAV-2000 Quick-Start Guide NSTALLING ATTERIES 1. Locate the battery door on the RAV-2000’s back and slide it off. RAV-2000 Intelligent Touch Panel Remote Control 2. Use the indicators to match and insert the four (4) AA batteries (included). 3. Slide the battery door back on.
Page 2 1. To activate the display, touch the screen anywhere. NOTE: To conserve battery life, the display will turn off if the RAV-2000 is idle for a few seconds. To adjust how long the touch screen stays on, see page 9 of the RAV-2000 Owner’s Manual.
Page 3 (e.g., Yamaha-1) and then touch the NEXT button. touch the NEXT button. NOTE: As an alternative, you can use the RAV-2000 to search 6. Using the scroll arrows, locate and touch the brand (e.g., for multiple RC codes. Please refer to the RAV-2000 Owner’s Yamaha) for your selected source (e.g., DVD player).
Page 4 If the source responds, touch the INSTALL button (as shown on the next page). If it does not respond, touch the BACK button ©2001 Yamaha Electronics Corporation, USA and then touch a different set of RC codes (e.g., Yamaha-2). 6660 Orangethorpe Avenue Buena Park, CA 90620 Repeat steps 8 and 9 as many times as needed until you find a http://www.yamaha.com...