Adjustment Of Skew - Toshiba e-studio200l Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-studio200l:

Table of Contents

Adjustment of Skew

Check if the image adjustment for the equipment is performed properly before this adjustment of

the RADF. Also, the RADF position and height shall be adjusted properly.

Check the image using the chart (original) with vertical and horizontal lines in the following procedure.

Simplex copying:

Place the chart provided as an original with its face up on the original tray of the RADF, select [1

Sided -> 1 Sided] and press the [START] button.

Superimpose the chart on the copy and check the inclination of the copy image.

Duplex copying:

Place the chart provided as an original with its face up on the original tray of the RADF, select [2

Sided -> 2 Sided] and press the [START] button.

Superimpose the chart on the copy and check the inclination of the copy image.

e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT

Fig.3-95 Chart (Original)

Show Quick Links

Table of Contents