7.2 DEMO MODE
The DEMO MODE function is intended only for the commercial activity and not for the user.
The internal temperature of the appliance, measured by the air sensors, must be higher than +10 °C so as the
function can be activated.
7.2.1 Start DEMO MODE
To start the procedure, hold down the ON/OFF button cooler+freezer and the freezer temperature decrease
button for more than 5 seconds.
The display digits flash every about 4 seconds.
7.2.2 Exit DEMO MODE
To exit the procedure, hold down the ON/OFF button cooler+freezer and the freezer temperature decrease but-
ton for more than 5 seconds or unplug the appliance.
7.2.3 Functions of the DEMO MODE
The procedure is used only for show in the selling points and allows selecting the temperatures without acti-
vating the loads (compressor and electric valve).
The displays show:
•
+ 5 °C for the cooler compartment (flashing display);
•
-18 °C for the freezer compartment (flashing display).
By pushing the temperature regulation buttons, the displays show the temperatures that can be set (flashing
display).
The internal light switches on when the cooler door is opened.
By pushing the cooler ON/OFF button it is possible to simulate the switching off of the cooler compartment (the
lamp is off).
- ITZAA
23/26
599 38 43-56