Table of Contents
Advertisement
Installation and replacement of hard disk drives
6.5
Installation of the extension HDD in
SISTORE AX8/AX16 500/200 V3.6
NOTE
It is recommended to integrate the first additional hard disk into the frame of the primary HDD.
28
Siemens Building Technologies
Fire Safety & Security Products
These instructions describe the installation of a HDD unit into the housing of a
Digital Video Recorder of type SISTORE AX16 500/200. When installing a HDD
unit in AX8 500/200 proceed in the same manner.
1. First shutdown the device and
disconnect from the power supply.
2. Remove the eleven screws on both
sides and at the rear of SISTORE AX.
See picture.
3. Lift up the housing cover at the rear of
the SISTORE AX, and lift it off.
4. In general, there are two possible ways
of expanding SISTORE AX:
By integrating an additional hard disk
–
in the frame of the primary HDD
AND / OR
By installing the hard disk unit
–
underneath the CD/DVD drive.
03.2009
Hide quick links:
Advertisement
Table of Contents
