Logging Handsets Onto A Telephone System - Siemens Hicom cordless EM Gigaset 3000 Micro Operating Instructions Manual

Hicom cordless em

Hide thumbs Also See for Hicom cordless EM Gigaset 3000 Micro:

Table of Contents

Logging handsets onto a telephone system

Your system administrator supplies you with handsets that

have already been logged on when you are installing the

system for the first time. You must log on any new handsets

as described below if you extend the system.

This is only required when the handset is put into service

for the first time.

Please call Siemens Service if you purchased the handset

directly from Siemens. Otherwise, call your retailer.

You can enter the name and call number of your system

administrator as well as the handset number here:

Your

system administrator

Tel. no. of

system administrator

Handset call number

Ask your system administrator to provide you with the fol-

lowing information:

– handset call number

– handset system PIN (8 digits)

Ask your system administrator to activate the logon win-

dow.

Take your handset and log it on to the system (see "Log-

ging on for the first time" or "Logging on at other systems"

on page 21).

Note:

The logon window is automatically closed if the handset

is not logged on as described above within 10 minutes. In

this case, you must repeat the procedure.

Table of Contents