Table of Contents
Advertisement
106 Retain jobs
If a job cannot be transmitted because for instance the partner fax is busy, your fax machine attempts to redial
the number at regular intervals of approx. 3 minutes*. After the XXth* redialling, the job will be automatically
deleted from the stack and a transmission report
such a job use this procedure. Each job will then be available for a certain time (1-24hours). If this job can not
be successfully sent during this period it will be deleted automatically from the memory.
Every time you retain a job in memory your fax prints out a transmission report
how long this job will be retained in memory.
To send retained jobs
*) Depending on setting
If too many documents are retained in memory, the fax memory will become full since every retained job
requires memory.
Retained jobs are lost in the event of a power failure.
. . . . .
. . . . .
START
STOP
see page
54.
(see page
96)
15-03
19:56
AUTO RECEIVE
MENU
1.FAX FEATURES
RECOVERY TX
1.ON
STORED TIME
(1-24)
(see page
82) will be printed out. To prevent the deletion of
Standby mode
100%
Start the menu
The first menu item is displayed
Select a menu item
Make your selection
for retain job
1. Retain job ON
2. Retain job OFF
Select a menu item
Make your selection
for retaining time
[ 8]
(preset retaining time is displayed)
Input retaining time
-and/or-
confirm with START
Press STOP , return to standby mode
(see page
82) to inform you
Advertisement
Table of Contents
